1. Protects skin from UVA and UVB rays, reducing the risk of sunburn and skin damage.
2. Provides hydration while forming a protective barrier against environmental aggressors.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Zinc Oxide | RS-128 | 15 | Physical UV filter for broad-spectrum protection. |
Ethanol | RS-A-035 | 20 | Solvent for even distribution of active ingredients. |
Shea Butter | RS- 140 | 5 | Emollient to hydrate and soften the skin. |
Glycerin | RS-085 | 8 | Humectant to retain moisture in the skin. |
Polysorbate-80 | RS-131 | 2 | Emulsifier to stabilize the formulation. |
Vitamin E | RS-141 | 1 | Antioxidant to protect against free radical damage. |
Phenoxyethanol | RS-135 | 0.5 | Preservative to prevent microbial growth. |
Deionized Water | Market sample | 48.5 | Base solvent and hydration source. |
1. Water Phase: Dissolve glycerin in deionized water and mix thoroughly.
2. Oil Phase: Melt shea butter and mix with zinc oxide and ethanol at 70°C
3. Emulsification: Combine the water and oil phases using a high-shear mixer.
4. Cooling Phase: Add Vitamin E and Phenoxyethanol at 40°C to maintain stability.
5. Final Mixing: Blend until uniform and pour into packaging.
1. Moisturizes and detangles hair, leaving it smooth and manageable.
2. Protects hair from dryness and reduces frizz for a shinier appearance.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Behentrimonium Methosulfate | RS-128
Market sample | 8 | Conditioning agent to smooth and detangle hair. |
Coconut Oil | Market sample | 6 | Emollient to moisturize and protect hair. |
Glycerin | RS-085 | 5 | Humectant to retain moisture |
Cetearyl Alcohol | Market sample | 4 | Thickener and stabilizer for creamy texture. |
Phenoxyethanol | Market sample | 0.5 | Preservative to prevent microbial contamination. |
Deionized Water | Market sample | 76.5 | Base solvent and hydration source. |
1. Oil Phase: Heat coconut oil, Behentrimonium Methosulfate, and Cetearyl Alcohol at 70°C.
2. Water Phase: Dissolve glycerin in deionized water and heat to 70°C.
3. Combining Phases: Add the oil phase to the water phase while stirring continuously.
4. Cooling Phase: Cool to 40°C and mix in Phenoxyethanol.
5. Final Blending: Mix until creamy and uniform before packaging.
1. Cleanses hair and scalp by removing dirt, oil, and buildup.
2. Provides hydration and nourishment for healthier-looking hair.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Sodium Lauryl Sulfate | Market sample | 15 | Surfactant for cleansing and foaming. |
Cocamidopropyl Betaine | RS-S-083 | 10 | Mild surfactant for gentle cleansing. |
Glycerin | RS-085 | 5 | Humectant to retain moisture |
Panthenol | Market sample | 2 | Conditioning agent to strengthen hair. |
Citric Acid | RS-A-065 | 0.3 | pH adjuster for scalp compatibility. |
Phenoxyethanol | Market sample | 0.5 | Preservative to ensure product safety. |
Deionized Water | Market sample | 67.2 | Base solvent for the formulation. |
1. Water Phase: Dissolve glycerin and citric acid in deionized water.
2. Surfactant Phase: Mix Sodium Lauryl Sulfate and Cocamidopropyl Betaine until uniform.
3. Combining Phases: Add the water phase to the surfactant phase gradually.
4. Final Additives: Add Panthenol and Phenoxyethanol while stirring continuously.
5. Final Mixing: Ensure uniformity and transfer to packaging.
1. Enhances the appearance of lips with vibrant color and a smooth finish.
2. Provides hydration and protection, preventing dryness and cracking.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Beeswax | Market sample | 20 | Provides structure and a smooth application. |
Carnauba Wax | Market sample | 5 | Enhances hardness for long-lasting wear. |
Castor Oil | Market sample | 40 | Emollient that delivers hydration and shine. |
Pigments (Iron Oxides) | Market sample | 10 | Adds vibrant and consistent color. |
Shea Butter | Market sample | 10 | Moisturizes and nourishes lips. |
Vitamin E | Market sample | 2 | Antioxidant that protects and conditions the lips. |
Preservatives | Market sample | 0.5 | Prevents microbial growth and extends shelf life. |
Fragrance/Flavor | Market sample | 0.5 | Adds pleasant scent or taste to the lipstick. |
Mica | Market sample | 2 | Provides a subtle shimmer or pearlescent effect. |
Deionized Water | Market sample | 10 | Used in emulsions for specific textures (optional). |
1. Melting Phase: Heat the beeswax, carnauba wax, and castor oil until fully melted.
2. Pigment Dispersion: Mix pigments and mica into the melted waxes for even color distribution.
3. Emulsification (if applicable): Blend water-based ingredients with the melted mixture using an emulsifier if water is included.
4. Cooling Phase: Allow the mixture to cool slightly before adding Vitamin E, preservatives, and fragrance.
5. Molding: Pour the mixture into lipstick molds, cool until solidified, and remove for packaging.
1. Controls oil and shine, creating a smooth, matte finish.
2. Sets makeup for long-lasting wear and minimizes imperfections.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Talc | Market sample | 50 | Provides a soft, silky texture and absorbs oil. |
Silica | Market sample | 10 | Reduces shine and gives a matte finish. |
Zinc Oxide | RS-128 | 5 | Offers coverage and sun protection. |
Mica | Market sample | 10 | Adds a subtle glow or shimmer. |
Kaolin Clay | Market sample | 10 | Absorbs excess oil and controls shine. |
Pigments (Iron Oxides) | Market sample | 5 | Provides color for skin tone matching. |
Preservatives | Market sample | 0.5 | Prevents microbial growth in pressed powders. |
Fragrance | Market sample | 0.5 | Adds a pleasant scent to the product. |
1. Powder Blending: Sift talc, silica, zinc oxide, mica, and kaolin clay together to ensure a uniform texture.
2. Pigment Addition: Mix pigments thoroughly into the powder base to achieve the desired color.
3. Binding Agent: Add a small amount of a binding agent (like a silicone or alcohol-based solution) to create a pressable consistency.
4. Pressing: Fill the mixture into pans or compacts and press using a mechanical press to achieve a firm surface.
5. Final Touch: Add a protective layer (if required) and package the product.
1. Prepares the skin by smoothing texture and creating a flawless base for makeup.
2. Helps extend the longevity of makeup while providing hydration and pore blurring.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Dimethicone | RS-S-046 | 20 | Silicone-based emollient for smoothing the skin. |
Glycerin | RS-085 | 10 | Humectant to retain skin moisture. |
Cyclopentasiloxane | RS-S-048 | 20 | Lightweight silicone for a silky application. |
Silica | Market sample | 5 | Reduces shine and blurs fine lines. |
Film-Forming Agents | Market sample | 5 | Provides a layer for improved makeup adherence. |
Preservatives | Market sample | 0.5 | Prevents microbial contamination. |
Vitamin E | Market sample | 2 | Antioxidant for skin protection. |
Deionized Water | Market sample | 37.5 | Serves as the base solvent for hydration. |
1. Silicone Phase: Blend Dimethicone and Cyclopentasiloxane to create a smooth, lightweight base.
2. Water Phase: Dissolve glycerin and any water-soluble ingredients in deionized water.
3. Combining Phases: Slowly add the water phase to the silicone phase while mixing to form an emulsion.
4. Active Additions: Blend in Vitamin E, silica, and film-forming agents at a lower temperature.
5. Final Mixing: Stir until uniform and smooth, then package in airless pump bottles or tubes.
1. Hydrates and nourishes the skin to maintain its natural barrier.
2. Protects against dryness while providing a smooth, soft texture.
| Ingredient | Trade name | Quantity (%) | Properties |
|---|---|---|---|
Glycerin | RS-085 | 10 | Humectant to draw moisture into the skin. |
Shea Butter | Market sample | 10 | Emollient to soften and nourish the skin. |
Squalane | Market sample | 5 | Lightweight oil for hydration and non-greasy texture. |
Cetearyl Alcohol | Market sample | 5 | Emulsifier and thickener for cream consistency. |
Dimethicone | RS-S-046 | 5 | Forms a barrier to lock in moisture. |
Preservatives | Market sample | 0.5 | Ensures product safety by preventing microbial growth. |
Vitamin E | Market sample | 1 | Antioxidant for skin health. |
Deionized Water | Market sample | 63.5 | Hydration source and base for the formulation. |
1. Water Phase: Dissolve glycerin in deionized water and heat to 70°C.
2. Oil Phase: Melt Shea Butter, Squalane, Cetearyl Alcohol, and Dimethicone in a separate vessel at 70°C.
3. Emulsification: Combine the oil phase with the water phase using a high-shear mixer to create an emulsion.
4. Cooling Phase: Allow the mixture to cool to 40°C, then add Vitamin E and preservatives.
5. Final Blending: Mix thoroughly until smooth, then transfer to jars or pump bottles.
Feel free to contact us. Click ‘Contact us’ to fill out the form, and we will get in touch with you as soon as possible.
RawSource is your trusted partner, offering excellent service with punctuality, reliable raw material supply, and the best prices.
Our team will get back to you