Industrial — Process Challenge

Polyaspartic & Aliphatic Polyurea Raw Materials

Fast-return-to-service aliphatic polyurea/polyaspartic floor systems need aliphatic curative + aliphatic isocyanate chemistry for rapid, UV-stable, abrasion-resistant cure
Updated Jun 2026
Solution Approach

RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.

Typical Formulation Workflow
1
System & Substrate Assessment
Define the binder system (waterborne, solventborne, UV, powder), substrate, cure, and the VOC, durability, and appearance targets.
2
Additive & Resin Selection
Match resins, pigments and fillers, dispersants, rheology modifiers, defoamers, or biocides to the formulation and compatibility window.
3
Lab Let-Down & Optimization
Dial in loading and addition order through lab let-downs, checking dispersion, rheology, film properties, and storage stability.
4
Application & Performance Testing
Validate on the real application method and substrate, tracking gloss, adhesion, sag, cure, and weathering before scale-up.
Recommended Chemistries (8)
Hexamethylene diisocyanate (HDI)
CAS 822-06-0
Specialty Additives
Crosslinking / Curing
2281 (HEXAMETHYLENE DIISOCYANATE) · Class
Aliphatic diisocyanate (as its trimer) is the isocyanate half of UV-stable, non-yellowing aliphatic polyurea floor systems
Physical Description: Hexamethylene diisocyanate appears as a colorle…   Appearance: Clear, colorless to slightly yellow liquid   Odor: Sharp, pungent odor
Quick view
Full Details
Hydrogenated MDI (H12MDI)
CAS 5124-30-1
Specialty Additives
Crosslinking / Curing
2206 (1,1-METHYLENE BIS(4-ISOCYANATOCYCLOHEXANE)) · Class
Cycloaliphatic isocyanate for tough, light-stable elastomeric polyurea floor and topcoat networks
Physical Description: 1,1-methylene bis(4-isocyanatocyclohexane) is a…   Appearance: Clear, colorless to light-yellow liquid   Melting Point: < -10 °C
Quick view
Full Details
4,4'-Diaminodicyclohexylmethane (PACM)
CAS 1761-71-3
Amines & Amides
Premium clarity and UV stability for topcoats
3259 (4,4'-DIAMINODICYCLOHEXYL METHANE) · Class
Cycloaliphatic diamine that cures aliphatic isocyanates into a fast-return-to-service, UV-stable aliphatic POLYUREA floor — the closest analog; a true aspartate-ester would be required for genuine polyaspartic cure kinetics
Melting Point: 60–62 °C (cis-cis) 64–65 °C (trans-trans)   Boiling Point: 330–331 °C at 3 mmHg   Density: 0.9608 at 25 °C
Quick view
Full Details
4,4′-Methylenebis(N-sec-butylcyclohexylamine)
CAS 154279-60-4
Polyurea Chain Extender
Chain extender for spray polyurea coatings; Chain extender for hand-applied polyurea coatings
Quick view
Full Details
p-Toluenesulfonyl isocyanate
CAS 4083-64-1
Polyaspartic & Moisture-Cure Coatings
High-solids polyaspartic and 1K moisture-curing waterproofing membranes
Quick view
Full Details
Polyoxypropylenetriamine, Mn ≈ 5000 (RS-T5000)
CAS 64852-22-8
Polyurea Raw Material
Triamine raw material for spray polyurea elastomers
Quick view
Full Details
Polyoxypropylenetriamine, Mn ≈ 3000 (RS-T3000)
CAS 64852-22-8
Polyurea Raw Material
Triamine used as a reactive soft block in polyurea RIM or spray applications
Quick view
Full Details
N,N'-Diisopropyl polyoxypropylenediamine, Mn ≈ 2000 (RS-SD2001)
CAS 81455-53-0
Polyurea Raw Material
Diamine with secondary amine ends, a raw material for polyurea and polyurethane systems
Quick view
Full Details

Need help selecting the right chemistry?

Our team can help with grade selection, dosage guidance, and multi-origin sourcing.

Request Quote All Coatings & Construction Problems
Request Quote