Industrial — Process Challenge

Amine Blush in Epoxy Coatings (Carbamate Formation)

In amine-cured epoxy coatings, curing agents that mainly carry primary amino groups take up carbon dioxide from the air and form stable carbonate and carbamate salts, which can give a tacky surface with hazing or spotting, up to incomplete curing: the defect called blushing (US 8,912,294 B2). It appears especially when the coating cures at high humidity, as CO2 dissolved in the water reacts with the primary amino groups (US 8,912,294 B2). It is also generally worse for coatings applied and cured cold, where amine-epoxy compatibility is reduced, and shipyard coatings may have to cure at 5 °C or lower (US 8,501,997 B2). Whether it shows as carbamation or as the greasy surface layer called exudate or blush, the defect can lead to intercoat adhesion failures if the film is recoated (US 8,501,997 B2). Benzyl alcohol reduces blushing during film formation, but a higher content can reduce the hardness of the cured film to an undesirable extent, and it is a VOC. Polyamines with secondary amino groups in general do not lead to blushing, but they are difficult to obtain or often very expensive to prepare. Adducts with polyepoxides, often used to convert primary amino groups to secondary ones, usually have a very high viscosity that often makes dilution with solvents or benzyl alcohol necessary (US 8,912,294 B2). How to remove blush before recoating is covered in our amine blush article.
Updated Nov 2026
Solution Approach

RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.

Typical Formulation Workflow
1
System & Substrate Assessment
Define the binder system (waterborne, solventborne, UV, powder), substrate, cure, and the VOC, durability, and appearance targets.
2
Additive & Resin Selection
Match resins, pigments and fillers, dispersants, rheology modifiers, defoamers, or biocides to the formulation and compatibility window.
3
Lab Let-Down & Optimization
Dial in loading and addition order through lab let-downs, checking dispersion, rheology, film properties, and storage stability.
4
Application & Performance Testing
Validate on the real application method and substrate, tracking gloss, adhesion, sag, cure, and weathering before scale-up.
Related Product Families

Need help selecting the right chemistry?

Our team can help with grade selection, dosage guidance, and multi-origin sourcing.

Request Quote All Coatings & Construction Problems
Request Quote