Why It Matters
Industrial parts cleaning and surface prep needs caustic, silicates, surfactants and chelants to lift oils and soils
Solution Approach
Industrial parts cleaning and surface prep needs caustic, silicates, surfactants and chelants to lift oils and soils RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Selection Workflow
1
Process & Requirement Definition
Map the unit operation and define the functional, purity, and regulatory requirements the chemical input must meet.
2
Chemistry & Grade Selection
Match the solvent, intermediate, acid or base, catalyst, or specialty additive to the process and downstream compatibility.
3
Trial & Specification
Validate performance at bench or pilot scale, and set the grade, treat rate, and packaging to match throughput and handling.
4
Quality & Supply Assurance
Lock the spec with a CoA and secure multi-origin sourcing for supply resilience and consistent lot quality.
Recommended Chemistries (6)
Caustic Soda (Sodium Hydroxide) Beads
CAS 1310-73-2
Acids & Salts
Primary alkali for industrial cleaning
1824 (SODIUM HYDROXIDE SOLUTION) · Class Sodium hydroxide saponifies fats and hydrolyzes oily soils into water-dispersible soaps - the alkalinity backbone of a soak/spray cleaner
Melting Point: 318 °C Boiling Point: > 130 °C at 760 mmHg Density: 1.5 at 20 °C
Full Details
Sodium Carbonate (Soda Ash)
CAS 497-19-8
Acids & Salts
Thickening / Rheology
Soda ash gives buffered alkalinity and water softening as a lower-cost builder alongside caustic
Melting Point: 856 °C Boiling Point: Decomposes on heating by CO2 loss Density: 2.54 g/cu cm
Full Details
Triethanolamine
CAS 102-71-6
Specialty Additives
Multi-functional amine emulsifier
Forms in-situ amine soaps that emulsify oil films and buffer the bath; multifunctional degreasing surfactant/builder
Melting Point: 22 °C Boiling Point: 335 °C at 760 mmHg (Decomposes) Density: 1.13 at 20 °C
Full Details
Nonylphenol Ethoxylate-9
CAS 9016-45-9
Surfactants
Surfactancy
Nonionic NP-9 surfactant lowers surface tension to wet metal and roll-up/emulsify oily soils in alkaline cleaners
Melting Point: 42-43 °C Solubility: >1000 mg/l
Full Details
Sodium Tripolyphosphate (STPP)
CAS 7758-29-4
Acids & Salts
Chelation / Sequestration
Sequesters Ca2+/Mg2+ hardness so surfactants are not deactivated and prevents redeposition of soils on cleaned parts
Melting Point: 622 °C Density: 2.52 g/cm3 Solubility: Freely soluble in water. Insoluble in ethanol
Full Details
Tetrasodium Pyrophosphate
CAS 7722-88-5
Acids & Salts
Chelation / Sequestration
Phosphate builder that softens water and peptizes particulate soil, boosting alkaline-cleaner detergency
Melting Point: 988 °C Boiling Point: Decomposes Density: 2.45
Full Details
Related Product Families
● Available
Metalworking Amine Emulsifiers & pH Buffers
Alkanolamines for pH control, emulsification, and corrosion inhibition in water-soluble metalworking fluids
pH AdjustmentEmulsificationCorrosion Inhibition
8 chemistries
View family
● Available
Alkaline Cleaning Chemicals
Caustic soda, silicates, and acids for industrial parts cleaning, descaling, and surface activation
CleaningpH Adjustment
10 chemistries
View family