Esters
Polyalphaolefin (PAO)
CAS 68037-01-4
A synthetic hydrocarbon base stock engineered for wide-temperature, high-performance lubrication. It is used as a synthetic base oil for lubricants, including engine oils, gear oils, greases, and compressor and hydraulic fluids.
Lubrication
Emolliency
View Details
Acids & Salts
Polyaluminum Chloride (PAC)
CAS 1327-41-9
A pre-hydrolyzed aluminum coagulant dosed at the head of clarification and settling processes. It destabilizes suspended solids and colloids in drinking-water clarification and in municipal and industrial wastewater treatment.
Chelation / Sequestration
View Details
Amines & Amides
Polyamine (Polyethylenepolyamines)
CAS 68131-73-7
A reactive ethyleneamine blend supplying multiple primary and secondary amine sites per molecule for crosslinking. They are used as curing agents for epoxy resins and as intermediates for surfactants, fuel and lubricant additives, and water-treatment chemicals.
Chelation / Sequestration
Crosslinking / Curing
View Details
Specialty Additives
Polycaprylylsilsesquioxane and Alumina
CAS 1344-28-1
A two-component cosmetic powder pairing a silicone resin with aluminum oxide for opacity and texture control. The alumina component functions as an opacifying, texturizing, and viscosity-controlling powder in cosmetic and personal-care formulations.
Thickening / Rheology
Color / Pigmentation
View Details
Surfactants - Cationic
Polydiallyldimethylammonium Chloride (PolyDADMAC)
CAS 26062-79-3
A quaternary-ammonium polyelectrolyte that neutralizes negatively charged colloids on contact. It is used as a primary coagulant and charge-neutralizing flocculant in drinking-water and wastewater treatment and as a charge-control additive in papermaking.
Film Formation
Conditioning
View Details
Silicone Fluids & Oils
Polydimethylsiloxane (PDMS) Fluid
CAS 63148-62-9
Defoaming / Foam Control
Slip / Release
View Details
Phosphate Esters & Derivatives
Polyepoxysuccinic Acid (PESA)
CAS 51274-37-4
A phosphorus-free polycarboxylate dosed where scale control without added phosphorus is required. It is used in recirculating cooling water and other industrial water-treatment programs.
Chelation / Sequestration
Scale Inhibition
View Details
Silicone Fluids & Oils
Polyether-Modified Trisiloxane (Trisiloxane Surfactant)
CAS 27306-78-1
A trisiloxane superwetter that collapses surface tension to drive rapid spreading on hard-to-wet surfaces. Its very low surface tension produces rapid wetting and spreading, and it is used as a superspreading spray adjuvant in agrochemical formulations and as a wetting and flow agent in coatings…
Surfactancy
Wetting
View Details
Amines & Amides
Polyetheramine D-2000
CAS 9046-10-0
A long-chain polyetheramine diamine that supplies the flexible soft segment in polyurea and polyurethane elastomers. It serves as a soft-segment amine for spray polyurea elastomers and flexible polyurethane systems and as a flexibilizer in epoxy formulations.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine D-205
CAS 9046-10-0
A short-chain amine-terminated polyether diamine for low-viscosity epoxy and polyurea curing. It is used as a low-viscosity curing agent (hardener) for epoxy resins and as an amine building block for polyurea and polyurethane systems.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine D-220
CAS 9046-10-0
A low-viscosity short-chain polyetheramine diamine for fast-handling epoxy and polyurea formulations. It is used as a low-viscosity curing agent for epoxy resins and as an amine building block for polyurea and polyurethane systems.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine D-230
CAS 9046-10-0
The workhorse short-chain polyetheramine diamine for clear, low-viscosity epoxy curing and polyurea. It is a common low-viscosity curing agent (hardener) for epoxy resins and an amine building block for polyurea and polyurethane systems.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine D-400
CAS 9046-10-0
A medium-chain polyetheramine diamine that flexibilizes epoxy networks and builds polyurea soft segments. Its longer chain makes it a flexibilizing curing agent for epoxy resins and a soft-segment amine for polyurea and polyurethane elastomers.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine D-4000
CAS 9046-10-0
The longest-chain polyetheramine diamine for maximum flexibility in polyurea and polyurethane elastomers. It is used as a soft-segment amine for spray polyurea and flexible polyurethane elastomers and as a toughening flexibilizer in epoxy systems.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine D-630
CAS 9046-10-0
An intermediate-chain polyetheramine diamine for flexible epoxy and polyurea/polyurethane chemistry. It is used as a flexibilizing epoxy curing agent and as a soft-segment amine in polyurea and polyurethane systems.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ED-1200 (PEG-Based Polyether Diamine)
CAS 65605-36-9
A high-weight hydrophilic polyether diamine for flexible, water-compatible formulations. It is a high molecular weight, flexible grade that acts as a reactive epoxy curing agent and chain extender.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ED-2003 (PEG-Based Polyether Diamine)
CAS 65605-36-9
A long-chain water-soluble diamine that contributes maximum flexibility and hydrophilicity. It is a highest-molecular-weight grade in the series with the longest, most flexible segments and lowest amine content that acts as a reactive epoxy curing agent and chain extender.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ED-210 (PEG-Based Polyether Diamine)
CAS 65605-36-9
A short, water-soluble polyether diamine for hydrophilic epoxy curing and chain extension. It is a low-molecular-weight, higher-amine-content grade that acts as a reactive epoxy curing agent and chain extender.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ED-410 (PEG-Based Polyether Diamine)
CAS 65605-36-9
A water-soluble polyether diamine bridging reactivity and flexibility in hydrophilic systems. It is a low-to-mid molecular weight grade that acts as a reactive epoxy curing agent and chain extender.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ED-600 (PEG-Based Polyether Diamine)
CAS 65605-36-9
A mid-weight hydrophilic polyether diamine for water-compatible epoxy and polyurea chemistry. It is a mid molecular weight grade that acts as a reactive epoxy curing agent and chain extender.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ED-900 (PEG-Based Polyether Diamine)
CAS 65605-36-9
A higher-weight water-soluble diamine that builds flexibility into cured networks. It is a higher molecular weight, more flexible grade that acts as a reactive epoxy curing agent and chain extender.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine EDR-148 (Triethylene Glycol Diamine)
CAS 4246-51-9
A short, rigid ether-linked diamine used to accelerate cure and extend chains. The compact, ether-linked backbone gives high reactivity, making it useful as a reactive chain extender and curing agent.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine EDR-176 (Short-Chain Polyether Diamine)
CAS 2997-01-5
A compact, fast-reacting ether diamine positioned as a rapid-cure chain extender. Its compact, ether-linked structure gives high reactivity for use as a reactive chain extender and curing agent.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine Fuel Detergent (PEA Deposit-Control Additive)
CAS 144736-30-1
A polyetheramine (PEA) deposit-control additive used in gasoline detergent packages. Built on a polyether backbone capped with a reactive amine head, it adsorbs onto and lifts carbonaceous deposits from fuel-system surfaces. PEA chemistry is the workhorse for keeping injectors, intake valves, and combustion chambers clean
Cleaning / Degreasing
View Details
Amines & Amides
Polyetheramine M-1000 (Polyether Monoamine)
CAS 83713-01-3
Polyetheramine M-1000 is a roughly 1,000 g/mol, high-ethylene-oxide polyether monoamine — a water-soluble, hydrophilic reactive modifier that improves the water-dispersibility and flexibility of waterborne epoxy and polyurea coatings.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine M-2005 (Polyether Monoamine)
CAS 83713-01-3
Polyetheramine M-2005 is a roughly 2,000 g/mol, predominantly propylene-oxide polyether monoamine used as a hydrophobic flexibilizing modifier in epoxy and polyurea systems. It adds surface activity and toughens the cured network while acting as a chain-stopper alongside primary diamine curatives.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine M-2070 (Polyether Monoamine)
CAS 83713-01-3
Polyetheramine M-2070 is a roughly 2,000 g/mol EO/PO polyether monoamine used as a flexibilizing reactive modifier and chain-stopper in epoxy systems. Its mixed ethylene-oxide / propylene-oxide backbone adds surface activity and water-dispersibility to amine-cured coatings and adhesives.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine SD-2001 (Secondary Polyether Diamine)
A long-chain secondary polyether diamine for flexible, slow-cure networks. As a higher-molecular-weight secondary diamine it functions as an epoxy curing agent and chain extender where extended pot life or gel time is needed.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine SD-231 (Secondary Polyether Diamine)
A hindered secondary polyether diamine that slows cure for longer working time. As a lower-molecular-weight secondary diamine it functions as an epoxy curing agent and chain extender where extended pot life or gel time is needed.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine SD-401 (Secondary Polyether Diamine)
A mid-weight secondary diamine balancing controlled cure with flexibility. As a mid-molecular-weight secondary diamine it functions as an epoxy curing agent and chain extender where extended pot life or gel time is needed.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine ST-404 (Secondary Polyether Triamine)
A trifunctional secondary-amine polyether that networks with extended working time. Its three reactive ends act as a crosslinking epoxy curing agent and network former with extended pot life.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine T-3000 (Trifunctional Polyether Triamine)
CAS 64852-22-8
A higher-weight triamine that crosslinks while contributing flexible soft segments. It is a higher-molecular-weight, flexible crosslinker whose three reactive amine ends act as a crosslinking epoxy curing agent and network former.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine T-403 (Trifunctional Polyether Triamine)
CAS 39423-51-3
A compact trifunctional polyether triamine that crosslinks epoxy and polyurea networks. It is a lower-molecular-weight crosslinker whose three reactive amine ends act as a crosslinking epoxy curing agent and network former.
Crosslinking / Curing
Synthesis Intermediate
View Details
Amines & Amides
Polyetheramine T-5000 (Trifunctional Polyether Triamine)
CAS 64852-22-8
A long-chain trifunctional triamine for flexible, networked polyurea and elastomer systems. It is a highest-molecular-weight, most flexible crosslinker whose three reactive amine ends act as a crosslinking epoxy curing agent and network former.
Crosslinking / Curing
Synthesis Intermediate
View Details
Polymers & Resins
Polyethylene (PE)
CAS 9002-88-4
The world's most-produced plastic, converted into everything from packaging film to pressure pipe. Grades span low-density (LDPE/LLDPE) and high-density (HDPE) resins for films, blow-molded containers, pipe, and injection-molded goods.
Thickening / Rheology
Film Formation
View Details
Glycols & Polyols
Polyethylene Glycol (PEG)
CAS 25322-68-3
A water-soluble polyether whose properties scale predictably from mobile liquids to solid waxes with molecular weight. It is used as a water-soluble solvent and humectant, as a lubricant and processing aid, and as a base for nonionic surfactant and ester derivatives.
Surfactancy
Film Formation
View Details
Glycols & Polyols
Polyethylene Glycol 12 (PEG-12)
CAS 9004-58-4
A mid-range PEG grade that adds water solubility and humectancy without heavy waxiness. As a water-soluble polyether it serves as a humectant, solvent, and viscosity and consistency modifier in formulated systems.
Surfactancy
Film Formation
View Details
Glycols & Polyols
Polyethylene Glycol 8 (PEG-8)
CAS 5117-19-1
A liquid PEG grade chosen for high water solubility and humectancy. It is used as a humectant, water-soluble solvent, and carrier in formulated systems.
Thickening / Rheology
Film Formation
View Details
Glycols & Polyols
Polyethylene Glycol Monostearate (PEG-2 Stearate)
CAS 106-11-6
A nonionic stearate ester used to emulsify oil-water systems and lend opacity. It functions as an emulsifier, opacifier, and thickener in cosmetic and industrial formulations.
Surfactancy
Color / Pigmentation
View Details
Acids & Salts
Polyferric Sulfate (PFS)
CAS 10028-22-5
An iron-based coagulant that forms dense, fast-settling flocs across a broad pH range. It is used as a primary coagulant for solids and color removal in drinking-water and wastewater treatment.
Moisture Control
View Details
Specialty Additives
Polyglyceryl-10 Oleate
CAS 79665-93-3
A decaglycerol oleate delivering PEG-free hydrophilic emulsification and solubilization from a polyol backbone. It is used as an oil-in-water emulsifier and solubilizer in personal-care formulations.
Surfactancy
Lubrication
View Details
Esters
Polyglyceryl-3 Diisostearate
CAS 66082-42-6
A branched-chain polyglycerol ester that emulsifies oil phases while contributing emollient slip. It is used as an emulsifier and emollient in cosmetic and personal-care formulations.
Surfactancy
Viscosity Modification
View Details
Acids & Salts
Polyglyceryl-3 Distearate
CAS 34424-97-0
A polyglycerol-based emulsifier that stabilizes oil-in-water systems without ethoxylation. It functions as an emulsifier and co-emulsifier in cosmetic and personal-care formulations.
Surfactancy
Emolliency
View Details
Esters
Polyglyceryl-3 Methylglucose Distearate
CAS 157175-98-9
A sugar-derived nonionic emulsifier for stable, light-textured oil-in-water emulsions. It is used as an oil-in-water emulsifier in cosmetic and personal-care formulations.
Emolliency
Surfactancy
View Details
Glycols & Polyols
Polyglyceryl-3 Oleate
CAS 49553-76-6
A polyglycerol oleate emulsifier offering a nonionic, ethoxylate-free route to stable emulsions. It functions as an emulsifier in cosmetic and personal-care formulations.
Surfactancy
Emolliency
View Details
Silicone Fluids & Oils
Polyglyceryl-4 Isostearate, Cetyl PEG/PPG-10/1 Dimethicone and Hexyl Laurate
CAS 91824-88-3
A pre-balanced water-in-oil emulsifier system pairing a polyglyceryl ester with a silicone surfactant and a spreading ester. It is used to build and stabilize water-in-oil emulsions in cosmetic and personal-care formulations.
Surfactancy
Wetting
View Details
Specialty Additives
Polyglyceryl-4 Laurate
CAS 75798-42-4
A lauric-acid polyglycerol ester used as a nonionic emulsifier and solubilizer. It functions as an emulsifier and surfactant in cosmetic and personal-care formulations.
Surfactancy
Emolliency
View Details
Acids & Salts
Polyhydroxystearic Acid (PHSA)
CAS 58128-22-6
A polyester of 12-hydroxystearic acid that anchors to pigment surfaces and sterically stabilizes them in oils. It is used as a pigment and particle dispersant and steric stabilizer in non-aqueous and water-in-oil systems and as an emulsion stabilizer and skin-conditioning agent in color cosmetics.
Surfactancy
View Details