Amines & Amides Available — Bulk Only

m-Xylylenediamine (MXDA)

CAS 1477-55-0 · Formula C8H12N2 · MW 136.19 g/mol

An araliphatic primary diamine used as a curing agent for epoxy resins and as a precursor to isocyanates in coatings, adhesives, and polymer systems.

Request SDS
UN Number
UN 3267
Hazard Class
Class 8
HS Code
2921.59
At a Glance
Material Family
Amines & Amides
Record Type
Pure compound
Primary Role
Crosslinking / Curing · pH Adjustment
Solubility
MISCIBLE WITH WATER AND ALC; PARTIALLY SOL IN PARAFFIN HYDROCARBON SOLVENTS
Industries Served
Physical Properties
Physical Description
M-xylene-alpha,alpha'-diamine is a colorless liquid with an amine smell. Mp: 14.1 °C; bp: 273 °C. Water soluble
Appearance
Colorless liquid
Boiling Point
247 °C at 760 mmHg
Melting Point
14 °C
Flash Point
117 °C
Solubility
MISCIBLE WITH WATER AND ALC; PARTIALLY SOL IN PARAFFIN HYDROCARBON SOLVENTS
Density
1.032
Vapor Pressure
0.03 mmHg at 25 °C
LogP
0.18
m-Xylylenediamine (MXDA)
Product code
RS-MXDA
Boiling Point
274 °C
Freezing Point
14.1 °C
Flash Point
113 °C
Packaging
200 kg drums, 1,000 kg IBC, 22.5 mt bulk

Supplied for industrial formulation and manufacturing use; not for retail or consumer sale.

Documents
Applications & Use Cases
  • ▸ Epoxy curing agent: Hardener for epoxy coatings and adhesives.
  • ▸ MXDI precursor: Intermediate for m-xylylene diisocyanate.
  • ▸ Polymer building block: Amine component in high-performance polymer systems.
Safety & Handling
Full SDS available on request

A grade-specific Safety Data Sheet (SDS) — with the complete hazard classification, handling precautions, and transport information — is supplied with every shipment and available on request. Confirm all safety and regulatory details against the SDS for your specific grade.

Request SDS →
DOT / UN Transport Classification
DOT hazard class 8 placard
UN / DOT NumberUN 3267
Hazard Class / DivisionClass 8
Proper Shipping NameCorrosive liquid, basic, organic, n.o.s

Transport classification per the UN Model Regulations / 49 CFR 172.101 Hazardous Materials Table. Confirm against the grade-specific SDS (Section 14) before shipping.

HS / Tariff Classification
Harmonized System (HS) Code — 6-digit international heading
2921 . 59
Chapter 29
Organic chemicals
Heading 29.21
Internationally harmonized (WCO HS)
Subheading 2921.59
6-digit international code — national tariff line adds further digits
Chemical Identity
CAS Number
1477-55-0
Molecular Formula
C8H12N2
Molecular Weight
136.19 g/mol
IUPAC Name
[3-(aminomethyl)phenyl]methanamine
PubChem CID
InChI Key
FDLQZKYLHJJBHD-UHFFFAOYSA-N
Synonyms
m-Xylylenediamine 1,3-BENZENEDIMETHANAMINE 1,3-Bis(aminomethyl)benzene 1,3-Xylylenediamine m-Xylylendiamin m-Phenylenebis(methylamine) Methylamine, m-phenylenebis- alpha,alpha'-Diamino-m-xylene m-Xylene-alpha,alpha'-diamine 1,3-Bis-aminomethylbenzen 3-(Aminomethyl)benzylamine m-Xylene-.alpha.,.alpha.'-diamine .alpha.,.alpha.'-m-Xylenediamine
Full Description

m-Xylylenediamine (CAS 1477-55-0) is an araliphatic primary diamine used primarily as a curing agent for epoxy resins. PubChem also records its use as a source of m-xylylene diisocyanate (MXDI). Supplied as a bulk amine intermediate for epoxy hardener and isocyanate manufacture.

Used with

Substances this product is used with, each from a cited source or from the product’s own technical data.

  • Diaminodiphenylmethane (MDA, 4,4′-Methylenedianiline): a 1:1 mass-ratio mixture cured a tetrafunctional epoxy resin with lower DSC exotherm peak temperatures than MDA alone, so the m-xylylenediamine made the blend more reactive. (ACS Omega, 2020)
  • epoxy resin: in one published study, stoichiometric mixes drawn down on glass were oven-cured from 60 °C with a 1 °C/min ramp to 160 °C and held there for 3 h. (ACS Applied Polymer Materials, 2021)
  • bisphenol F epoxy resin: cured at stoichiometric ratio to more than 99% conversion by near-infrared analysis in one published study. (ACS Applied Polymer Materials, 2021)

Alternatives

Each alternative holds only under the condition given with it.

  • 1,4-Cyclohexanebis(methylamine): in one study with a bisphenol F epoxy resin, 1,3-substitution and aromaticity, both present in m-xylylenediamine, benefited chemical performance judged only by methanol and ethanol sorption. The mix ratio changes. (ACS Applied Polymer Materials, 2021)

Made into

What this product is a raw material for.

  • polyamide: with adipic acid gives the polyamide MXD6, which has good gas barrier properties and high mechanical strength but a low rate of crystallization. (Polymers, 2022)

For industrial and professional use only. Not for supply to the general public.

Safety Data Sheet: provided before or with your first shipment. Request it with your quotation.

Regulatory & registration requirements

  • TSCA (US):
  • REACH (EU):
  • EC number: 216-032-5

Source: EPA TSCA Inventory (July 2025 release) · ECHA CHEM — retrieved 2026-07-12

Frequently Asked Questions

What is m-Xylylenediamine (MXDA) used for?

MXDA (CAS 1477-55-0) is used primarily as a curing agent (hardener) for epoxy resins in coatings and adhesives. It also serves as the precursor to m-xylylene diisocyanate (MXDI) and as an amine building block in high-performance polymer systems.

What is another name for m-Xylylenediamine?

It is also known as MXDA, 1,3-bis(aminomethyl)benzene, and m-xylene-alpha,alpha'-diamine. CAS 1477-55-0; molecular formula C8H12N2.

What is the structure of m-Xylylenediamine?

MXDA is an araliphatic primary diamine: a benzene ring bearing two aminomethyl (-CH2NH2) groups in the meta (1,3) positions, formula C8H12N2. The two primary amine groups provide the reactive sites that cure epoxy resins.

How does MXDA ship under DOT/IMDG?

MXDA is assigned UN 3267 (corrosive liquid, basic, organic, n.o.s.). It must be packaged, labeled, and documented per applicable transport regulations; consult the SDS for the full classification before shipping.

What is the HS code and how is bulk MXDA supplied?

MXDA classifies under HS 2921.59 (aromatic polyamines and derivatives). It is supplied as a bulk amine intermediate for epoxy-hardener and isocyanate manufacture; request a bulk quote with SDS and CoA for drum or tote quantities.

What is the REACH and TSCA regulatory status of m-Xylylenediamine (MXDA)?

m-Xylylenediamine (MXDA) (CAS 1477-55-0) is subject to U.S. TSCA Inventory requirements; supplying it into the EU requires valid REACH registration ((EC) No 1907/2006). Buyers should require documented TSCA and REACH compliance for their jurisdiction and volume (EC 216-032-5).

Disclaimer. Information on this page — including properties, identifiers, hazard, transport (DOT/UN) and tariff (HS) classifications, and applications — is provided for general reference and is compiled from authoritative public sources (e.g. PubChem/ECHA, 49 CFR 172.101, the Harmonized Tariff Schedule). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot purchased governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim or advice. Always consult the current Safety Data Sheet (SDS) before handling, storage, transport or disposal, and confirm regulatory status, classification and suitability for your application and jurisdiction. Hazard, transport and tariff classifications must be verified for your specific shipment. RawSource makes no warranty, express or implied, and assumes no liability for use of this information. Trademarks. Third-party trademarks and brand names are the property of their respective owners; any reference is nominative — used only to identify a comparable product — and does not imply affiliation with, sponsorship by, or endorsement by the trademark owner.