4,4'-ISOPROPYLIDENEDIPHENOL/EPICHLOROHYDRIN COPOLYMERSupplied for industrial formulation and manufacturing use; not for retail or consumer sale.
- ▸Technical data sheet, RS-DGEBA (PDF)
- ▸Safety data sheet: on request
- ▸Certificate of analysis: issued per lot with each shipment
- ▸ Adhesives: Structural and industrial adhesive base.
- ▸ Coatings: Protective and industrial coatings.
- ▸ Castings and potting: Encapsulation, castings, and tooling.
- ▸ Composites: Binder for fiberglass and composite laminates.
A grade-specific Safety Data Sheet (SDS) — with the complete hazard classification, handling precautions, and transport information — is supplied with every shipment and available on request. Confirm all safety and regulatory details against the SDS for your specific grade.
Request SDS →Bisphenol A diglycidyl ether epoxy resin (CAS 25068-38-6; also listed as CAS 1675-54-3), the bisphenol-A-based liquid epoxy that is the building block of most epoxy systems. It is used to formulate adhesives, protective and industrial coatings, castings and pottings, and fiberglass-reinforced composite laminates. Cured DGEBA epoxies are valued for adhesion and chemical resistance.
Used with
Substances this product is used with, each from a cited source or from the product’s own technical data.
- Isophorone Diamine (IPDA): gels in 180 min at 23 °C in a 200 g mass and reaches a Tg of 153 °C in one published example. (US 5,235,007 A)
- Diethylenetriamine (DETA): gels in 40 min at 23 °C in a 200 g mass, with a cured Tg of 130 °C and a maximum exotherm of 265 °C, in one published example. (US 5,235,007 A)
- Polyoxypropylenediamine, Mn ≈ 230: used at 32 phr with a standard liquid bisphenol A epoxy resin of EEW 188 in a worked mix-ratio example (AHEW 60 g/eq). (published technical bulletin)
- Diaminodiphenylmethane (MDA, 4,4′-Methylenedianiline): a stoichiometric mix cured 4 h at 90 °C without post-cure showed two DMA tan delta peaks, 110.8 °C (partially cured) and 154.9 °C (assigned to the fully cured Tg). (Polymers, 2017)
- Bisphenol F Diglycidyl Ether Epoxy Resin (DGEBF, BPF Epoxy): blending the two is a known way to decrease the crystallization tendency of the liquid bisphenol A resin. (US 9,745,409 B2)
Alternatives
Each alternative holds only under the condition given with it.
- Bisphenol F Diglycidyl Ether Epoxy Resin (DGEBF, BPF Epoxy): serves as an alternative epoxy resin, and the two resins can be blended in any proportion. With a hardener, the mix ratio changes.
For industrial and professional use only. Not for supply to the general public.
Safety Data Sheet: provided before or with your first shipment. Request it with your quotation.
Regulatory & registration requirements
- TSCA (US):
- REACH (EU):
- EC number: 500-033-5
TSCA Inventory flag XU: a substance exempt from reporting under the Chemical Data Reporting Rule (40 CFR 711) (EPA flag legend).
Source: EPA TSCA Inventory (July 2025 release) · ECHA CHEM — retrieved 2026-07-12
Frequently Asked Questions
What is bisphenol A diglycidyl ether (DGEBA) used for?
Bisphenol A diglycidyl ether epoxy resin (CAS 25068-38-6) is the bisphenol-A-based liquid epoxy that is the building block of most epoxy systems. It is used to formulate adhesives, protective and industrial coatings, castings and pottings, and fiberglass-reinforced composite laminates, valued for adhesion and chemical resistance after cure.
Who supplies bisphenol A diglycidyl ether in bulk?
RawSource supplies DGEBA epoxy resin (CAS 25068-38-6) in bulk to adhesive, coating, casting, and composite manufacturers. Request a bulk quote with your target volume, viscosity/epoxy-equivalent requirement, and destination.
What is the CAS number and HS code for DGEBA epoxy resin?
DGEBA liquid epoxy resin is CAS 25068-38-6 and classifies under HS 3907.30 (epoxide resins). The single-monomer BADGE has its own CAS (1675-54-3); confirm which form your specification requires on the quote.
What is BADGE and how does it relate to DGEBA resin?
BADGE is bisphenol A diglycidyl ether, the pure diglycidyl ether monomer. Commercial DGEBA liquid epoxy (CAS 25068-38-6) is the oligomeric resin built on that BADGE backbone and is the standard base for most epoxy formulations.
How is DGEBA epoxy resin packaged and can you provide a CoA and SDS?
We supply DGEBA epoxy resin in bulk packaging such as pails, drums, and totes, with packaging and MOQ confirmed per order. A Certificate of Analysis (including epoxy equivalent weight and viscosity) and a Safety Data Sheet are available with each shipment; request a bulk quote with your target volume.
What is the REACH and TSCA regulatory status of DGEBA Liquid Epoxy Resin (Bisphenol-A Diglycidyl Ether)?
DGEBA Liquid Epoxy Resin (Bisphenol-A Diglycidyl Ether) (CAS 25068-38-6) is subject to U.S. TSCA Inventory requirements; supplying it into the EU requires valid REACH registration ((EC) No 1907/2006). Buyers should require documented TSCA and REACH compliance for their jurisdiction and volume (EC 500-033-5).
What is the CAS number of Bisphenol A diglycidyl ether (DGEBA) epoxy resin?
The CAS number of Bisphenol A diglycidyl ether (DGEBA) epoxy resin is 25068-38-6.