Silicone Fluids & Oils
Amodimethicone
CAS 68037-59-2
View Details →
Mineral Fillers & Pigments
Boron Nitride (BN, hBN)
CAS 10043-11-5
A layered ceramic that lubricates like graphite, conducts heat, and withstands extreme temperatures without melting. It is used as a high-temperature solid lubricant and release agent, a thermally conductive yet electrically insulating filler, a refractory and foundry material, and as a slip and soft-focus agent…
View Details →
Esters
Calcium Stearate
CAS 1592-23-0
A metallic-soap additive that lubricates, releases, and scavenges acid across plastics and building materials. It stabilizes PVC resins, acts as a release agent for molded plastics, and waterproofs fabrics, cement, and stucco.
View Details →
Esters
Carnauba Wax
CAS 8015-86-9
The hardest commercial natural wax, prized for the high gloss and elevated melt point it brings to polishes and coatings. It is used to impart gloss and hardness in automotive, furniture, and shoe polishes, as a coating and release agent, in paper and surface coatings,…
View Details →
Silicone Fluids & Oils
Cetyl Methicone
CAS 191044-49-2
A wax-like alkyl silicone that delivers a smooth, conditioning finish with water-repellent slip. It is used as an emollient and conditioning agent in cosmetic and personal-care formulations, where it provides a silky, water-repellent film.
View Details →
Silicone Fluids & Oils
Cyclopentasiloxane (Decamethylcyclopentasiloxane, D5)
CAS 541-02-6
A volatile cyclic silicone fluid prized as a fast-spreading carrier that flashes off cleanly without residue. It is used as a carrier, emollient, and solvent in personal-care products, as a dry-cleaning solvent, and as an intermediate in manufacturing higher-molecular-weight siloxane polymers.
View Details →
Silicone Fluids & Oils
Cyclopentasiloxane and Dimethiconol Blend
A multi-component silicone blend formulated as a conditioning and slip base for hair and skin care. Used as a conditioning, smoothing, and slip-enhancing base in hair- and skin-care formulations.
View Details →
Silicone Fluids & Oils
Decamethyltetrasiloxane (MD2M)
CAS 141-62-8
Decamethyltetrasiloxane (MD2M) is a linear tetrasiloxane with a viscosity of approximately 2 cSt at 25°C. It is used as an intermediate in silicone polymer production and as a low-viscosity carrier fluid in industrial formulations.
View Details →
Mineral Fillers & Pigments
Diatomaceous Earth (Diatomite, DE)
CAS 68855-54-9
A flux-calcined siliceous fossil meal supplied in bulk as a high-flow filter aid and functional filler. Its high porosity and surface area make it a standard filter aid, and it also serves as a functional filler, mild abrasive, and absorbent.
View Details →
Silicone Fluids & Oils
Dimethicone (PDMS)
CAS 9006-65-9
Dimethicone is the flagship linear silicone fluid (polydimethylsiloxane), selected by viscosity across a wide grade ladder. Low-cSt volatile grades act as carriers and spreading agents; mid grades deliver slip, gloss and softening; high-viscosity grades provide damping, dielectric and antifoam performance.
View Details →
Dimethicone (Polydimethylsiloxane, PDMS)
CAS 9006-65-9
A linear silicone fluid that brings slip, lubrication, and foam control to both industrial and personal-care systems. It is used as an antifoam in aqueous systems, petroleum processing, and detergents; as a lubricant for films, yarn, and fillers; and as an emollient, skin-conditioning, antifoaming, and…
View Details →
Silicone Fluids & Oils
Dimethicone Crosspolymer
CAS 300-00-5
A crosslinked silicone network that thickens and gels the oil phase while imparting a soft, powdery after-feel. In cosmetic ingredient nomenclature it functions as a thickening, gelling, and sensory-modifying agent for the oil phase of personal-care formulations.
View Details →
Silicone Fluids & Oils
Dodecamethylpentasiloxane (MD3M)
CAS 141-63-9
Decamethylcyclopentasiloxane (D5) is a cyclic silicone fluid that provides emolliency, lubrication, and slip & leveling properties in industrial formulations. This silicone compound is utilized across beauty & personal care, HI&I cleaning, plastics & polymers, and water treatment applications.
View Details →
Amines & Amides
Erucamide
CAS 112-84-5
View Details →
Amines & Amides
Ethylene Bis-Stearamide (EBS)
CAS 110-30-5
View Details →
Mineral Fillers & Pigments
Fumed Silica (Pyrogenic Silica, Colloidal Silicon Dioxide)
CAS 112945-52-5
A pyrogenic silica that builds viscosity and controls flow at low loadings across liquids and powders. It is used as a thickening and anti-settling agent, as an anti-caking agent in powders and foods, as a pharmaceutical excipient, and as a viscosity-controlling and bulking ingredient in…
View Details →
Silicone Fluids & Oils
Hexamethyldisiloxane (MM, HMDSO)
CAS 107-46-0
Hexamethyldisiloxane (MM / HMDSO, CAS 107-46-0) is the shortest linear siloxane and the most volatile silicone fluid, at about 0.65 cSt — sold in the trade as MM fluid. It acts as a chain stopper in PDMS manufacture, a fast-evaporating carrier in personal care, and…
View Details →
Mineral Fillers & Pigments
Hydrated Silica
CAS 10279-57-9
Synthetic amorphous silica delivered in grades for dentifrice abrasion, flow control, and rheology building. It functions as a mild abrasive, absorbent, and anti-caking/thickening agent, with primary use in dentifrices and personal-care products and as a filler in industrial formulations.
View Details →
Mineral Fillers & Pigments
Kaolin (China Clay)
CAS 1332-58-7
A bright, inert aluminosilicate clay that coats paper, builds ceramics and extends filled compounds. Its largest uses are as a coating pigment and filler in paper and as a body and glaze raw material in ceramics, tiles and sanitary ware.
View Details →
Amines & Amides
L-Leucine (Leucine)
CAS 61-90-5
A branched-chain essential amino acid recognized as a low-concern processing aid and nutrition ingredient. It is used as a nutritional supplement and food flavoring/processing aid, as a substrate for biochemical research, and as a skin- and hair-conditioning ingredient in cosmetics.
View Details →
Specialty Additives
Lecithin (Soy Lecithin)
CAS 8002-43-5
A phospholipid emulsifier that bridges oil and water phases in food, feed, and industrial systems. It functions as an emulsifier, surfactant, wetting and dispersing agent, and release agent across food, feed, and industrial formulations.
View Details →
Silicone Fluids & Oils
Liquid Silicone Rubber (LSR)
CAS 70131-67-8
A pumpable silicone elastomer that molds into flexible, thermally stable parts. It cures into a heat-, cold-, and weather-resistant rubber used for molded seals, gaskets, and O-rings, for electrical insulation and encapsulation, and for flexible molds and heat-resistant housewares.
View Details →
Esters
Lithium Stearate (Lithium Octadecanoate)
CAS 4485-12-5
The lithium soap that gels base oils into water-resistant, wide-temperature lubricating greases. It is used primarily as a thickener and gelling agent that converts oils into lithium-soap lubricating greases, and as a lubricant, mold-release, and stabilizing additive in plastics and coatings.
View Details →
Esters
Magnesium Stearate
CAS 557-04-0
A workhorse metallic-soap lubricant and flow aid for tablet, powder, plastic, and cosmetic formulations. It is widely used as a lubricant, anticaking, and release agent in tableting and powder processing, as a lubricant and stabilizer in plastics, and as an emulsifying and refatting agent in…
View Details →
Silicone Fluids & Oils
Methyl Trimethicone
CAS 63148-57-2
A volatile branched silicone that delivers a dry, fast-spreading slip to skin and hair care. It is used in personal-care formulations as a light, non-greasy emollient, spreading agent, and skin- and hair-conditioning carrier.
View Details →
Mineral Fillers & Pigments
Mica
CAS 12001-26-2
A platy aluminosilicate mineral that reinforces and insulates across coatings, plastics, and drilling fluids. Ground mica's primary end uses are joint compound, oil-well-drilling additives, paint, roofing, and rubber products.
View Details →
Specialty Additives
Molybdenum Disulfide
CAS 1317-33-5
View Details →
Specialty Additives
Montan Wax (Montanic Acid Ester Wax)
CAS 8002-53-7
View Details →
Esters
Myristyl Myristate
CAS 3234-85-3
A dry-feel cosmetic ester used as an emollient and opacifier. It is used in cosmetic and personal-care formulations as an emollient, opacifier, and skin-conditioning agent.
View Details →
Polymers & Resins
Nylon 12 (Polyamide 12, PA12)
CAS 24937-81-3
A low-moisture, chemical-resistant polyamide supplied as pellets and powder for tubing, coatings, and powder-bed printing. Established uses include flexible tubing and fluid lines, polyamide powder coatings, selective-laser-sintering powder for additive manufacturing, and molded engineering components.
View Details →
Acids & Salts
Oleamide (Oleic Acid Amide)
CAS 301-02-0
A fatty-amide slip and anti-block additive for polyolefin film and molded parts. Established uses include service as a slip and anti-block agent for polyethylene and polyolefin film, a lubricant and mold-release agent, an additive to waxes, printing inks, and lubricating oils, and an antistatic/dispersion aid.
View Details →
Esters
Oleyl Erucate
CAS 17673-56-2
A long-chain wax ester that delivers a light, lubricious emollient feel in skin-care and color cosmetics. It is used as an emollient in cosmetic and personal-care formulations.
View Details →
Polymers & Resins
Oxidized Polyethylene Wax
CAS 68441-17-8
View Details →
Specialty Additives
Paraffin Wax
CAS 8002-74-2
A refined petroleum wax that delivers a controllable melt point for candles, coatings, and barrier applications. It is used in candles, coatings, and packaging, and as a release and waterproofing agent across industrial applications.
View Details →
Silicone Fluids & Oils
Phenyl Trimethicone
CAS 2116-84-9
A phenyl-functional silicone fluid used as an emollient and conditioning agent in personal-care formulations. It is used in cosmetic formulations as an emollient, antifoaming and antistatic agent, and as a viscosity modifier.
View Details →
Specialty Additives
Polycaprylylsilsesquioxane and Alumina
CAS 1344-28-1
A two-component cosmetic powder pairing a silicone resin with aluminum oxide for opacity and texture control. The alumina component functions as an opacifying, texturizing, and viscosity-controlling powder in cosmetic and personal-care formulations.
View Details →
Silicone Fluids & Oils
Polydimethylsiloxane (PDMS) Fluid
CAS 63148-62-9
View Details →
Polymers & Resins
Polyethylene (PE)
CAS 9002-88-4
The world's most-produced plastic, converted into everything from packaging film to pressure pipe. Grades span low-density (LDPE/LLDPE) and high-density (HDPE) resins for films, blow-molded containers, pipe, and injection-molded goods.
View Details →
Polymers & Resins
Polymethyl Methacrylate (PMMA)
CAS 9011-14-7
A glass-clear acrylic thermoplastic, and in microsphere form a soft-focus texturizing powder. In primary and sheet form it is used for rigid transparent glazing, signage, coatings and molded parts; as fine spherical microspheres it is used as a bulking agent and slip modifier in cosmetics.
View Details →
Silicone Fluids & Oils
Polymethylsilsesquioxane
CAS 68554-70-1
A crosslinked silicone resin in spherical-powder form that rolls between surfaces for slip and a soft-focus, matte finish. It is used as a bulking agent and slip modifier that imparts a smooth, dry, soft-focus feel in color cosmetics and skin-care formulations.
View Details →
Polymers & Resins
Polypropylene (PP)
CAS 9003-07-0
A lightweight, chemically resistant polyolefin spanning rigid packaging, fibers, and automotive parts. It is converted into rigid packaging, fibers and nonwovens, films, and molded components for automotive and consumer goods.
View Details →
Silicone Fluids & Oils
Polysilicone-19
CAS 156065-02-0
A film-forming silicone polymer engineered for durable, flexible deposition in hair-styling and conditioning systems. It functions as a film former and conditioning agent, depositing a flexible silicone film on hair.
View Details →
Polymers & Resins
Polytetrafluoroethylene (PTFE) Dispersion
CAS 9002-84-0
A waterborne route to PTFE's non-stick, low-friction surface on coated and impregnated substrates. It is applied as a non-stick, low-friction, and chemically resistant coating and is used to impregnate glass fabric, bearings, and other substrates.
View Details →
Mineral Fillers & Pigments
Precipitated Silica
CAS 112926-00-8
View Details →
Surfactants - Cationic
Quaternium-80 (Silicone-Based Quaternary Ammonium Compound)
CAS 134737-05-6
Silicone-quat conditioning chemistry for slip, detangling, and static control in hair care. It pairs a dimethicone-type silicone segment with cationic quaternary groups and is used in personal-care formulations as a hair-conditioning and antistatic agent.
View Details →
Mineral Fillers & Pigments
Silica Dimethyl Silylate (Hydrophobic Fumed Silica)
CAS 68611-44-9
Fumed silica capped with dimethylsilyl groups so it thickens oils and stays free-flowing in moisture. It is used as a rheology modifier and anti-settling thickener for non-aqueous and oil-rich systems, as an anti-caking and flow aid, and as an absorbent and bulking agent.
View Details →
Mineral Fillers & Pigments
Silica Dimethyl Silylate [Nano]
CAS 68611-44-9
A hydrophobic silica used as a thickening agent in cosmetics.
View Details →
Silicone Fluids & Oils
Silicone Oil 1,000 cSt (Dimethicone, PDMS)
CAS 9006-65-9
The classic antifoam base oil at 1,000 cSt — tenacious yet still dispersible. Dimethicone (PDMS) for foam control, tenacious lubrication and conditioning.
View Details →