Coatings & Construction / Solution Family

Molecular Sieve Desiccants

Activated molecular sieve powders 3A, 4A, 5A and 13X, recorded for 2K polyurethane coatings and 1K storage protection, compared by pore size and water uptake.

Overview

This family lists the four molecular sieves on RawSource whose activated powder grade is recorded for coatings: 3A, 4A, 5A and 13X. Each powder record lists 2K polyurethane coatings and moldings, 1K polyurethane storage protection, and polysulfide and silicone systems for storage protection of metallic pigment coatings. The records describe the powder as molecular sieve raw powder roasted at high temperature with additives, so that it can be dispersed into a material and take up impurities such as water without changing the product's own properties.

The four powders share a particle size of 2 – 4 μm and a pH of 9 – 11. They differ in nominal pore diameter, 3, 4, 5 and 10 angstroms, and in static water adsorption at 35 °C, RH 75 % and 24 h: 23 wt% min for 3A, 24 wt % for 4A, 25 wt % for 5A and 27 wt % for 13X. The 4A bead and bar record also lists use as a dehydrating agent in paints, fuels and coatings.

The patents do not agree on pore size. US 6,051,647 says zeolites 4A, 5A and 10A also adsorb nitrogen from air at ambient temperature and release it during the exothermic polymerization, creating microbubbles in non-foamed polyurethane, which is a reason 3A is preferred there. For polyurea coating compositions, US 7,001,948 names molecular sieve 3A powder as a particularly preferred molecular sieve for the moisture scavenger. An older patent, US 3,326,844, says any suitable molecular sieve zeolite may be used in polyurethane coating compositions and calls types 4A, 5A and 13X particularly advantageous.

Where it's used
  • 2K polyurethane coatings and moldings (activated powders)
  • 1K polyurethane storage protection (activated powders)
  • Polysulfide and silicone systems for storage protection of metallic pigment coatings (activated powders)
  • Dehydrating agent in paints, fuels and coatings (4A beads and bars)
Frequently asked questions
Which of these molecular sieve powders are recorded for polyurethane coatings?
All four. The activated powder records for 3A, 4A, 5A and 13X each list 2K polyurethane coatings and moldings and 1K polyurethane storage protection, and also polysulfide and silicone systems for storage protection of metallic pigment coatings.
Why does one patent prefer 3A in non-foamed polyurethane?
US 6,051,647 says zeolites 4A, 5A and 10A also adsorb nitrogen from air at ambient temperature and release it during the exothermic polymerization, which creates microbubbles in non-foamed polyurethane. That is the reason it gives for preferring 3A.
Where does a molecular sieve go in a polyurea coating?
US 7,001,948, on polyurea coating compositions, says moisture scavengers are most preferably provided in the amine-containing B side, that the moisture scavenger is most preferably a molecular sieve, and it names molecular sieve 3A powder as a particularly preferred molecular sieve for the moisture scavenger. It puts the moisture scavenger at preferably 1 to 6% of the total coating.
How do the four powders compare on their records?
Nominal pore diameter is 3, 4, 5 and 10 angstroms for 3A, 4A, 5A and 13X, and static water adsorption (35 °C, RH 75 %, 24 h) is 23 wt% min, 24 wt %, 25 wt % and 27 wt %. Tapped bulk density is 0.45 g/ml min for 3A, 4A and 5A and 0.33 g/ml min for 13X.
Disclaimer. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
Request Quote Product Page