- ▸ Epoxy crosslinker: Trifunctional hardener that builds crosslinked networks.
- ▸ Polyurea/polyurethane: Trifunctional amine for elastomers and coatings.
- ▸ Composites: Curing agent for fiber-reinforced systems.
- ▸ Adhesives & sealants: Network-forming reactive amine.
- ▸ Technical Data Sheet (TDS) PDF · TDS
- ▸ Typical Certificate of Analysis (CoA) PDF · COA
Values shown are typical for the current commercial grade. A lot-specific Certificate of Analysis accompanies every shipment; the grade-specific SDS is available on request.
A grade-specific Safety Data Sheet (SDS) — with the complete hazard classification, handling precautions, and transport information — is supplied with every shipment and available on request. Confirm all safety and regulatory details against the SDS for your specific grade.
Request SDS →Polyetheramine T-403 is a trifunctional, amine-terminated polyether triamine based on a propylene-oxide backbone; the grade number tracks approximate average molecular weight. It is a lower-molecular-weight crosslinker whose three reactive amine ends act as a crosslinking epoxy curing agent and network former. Established applications are in polyurea and polyurethane elastomers, composites, coatings, adhesives and sealants.
Regulatory & registration requirements
- TSCA (US):
- REACH (EU):
- EC number: 500-105-6
TSCA Inventory flag XU: a substance exempt from reporting under the Chemical Data Reporting Rule (40 CFR 711) (EPA flag legend).
Source: EPA TSCA Inventory (July 2025 release) · ECHA CHEM — retrieved 2026-07-12
Solutions Using This Product
Process-solution guides on this site that specify this chemistry:
- Epoxy Hardeners & Amine Curing Agents (Pot-Life Control) (Coatings & Construction)
Frequently Asked Questions
Is Polyetheramine T-403 an equivalent to Jeffamine T-403?
Polyetheramine T-403 is the generic amine-terminated polyether (polyetheramine) commonly sold as Jeffamine T-403. RawSource supplies an independent equivalent — verified to your specification and Certificate of Analysis — and is not affiliated with, authorized by, or endorsed by Huntsman.
What is Polyetheramine T-403 used for?
T-403 is a lower-molecular-weight, trifunctional polyether triamine used as a crosslinking epoxy curing agent and network former. Its three reactive amine ends build crosslinked networks in polyurea and polyurethane elastomers, composites, coatings, adhesives and sealants.
What is the CAS number of Polyetheramine T-403?
T-403 is assigned CAS 39423-51-3, with a representative molecular formula of C17H37NO3, on a propylene-oxide backbone. The definitive identity for any supplied lot is confirmed on its CoA and SDS.
How does T-403 differ from T-3000 and T-5000?
All three are trifunctional propylene-oxide triamines that crosslink epoxies; the number tracks approximate molecular weight. T-403 is the lowest-MW grade, giving higher crosslink density and a stiffer network, while T-3000 and T-5000 are higher-MW and more flexible.
What is the cost of bulk Polyetheramine T-403?
Pricing is volume-, packaging- and freight-dependent and is quoted per order rather than published. Submit your required quantity, packaging and destination for a current bulk quote.
What packaging and order quantities are available for bulk T-403?
RawSource supplies T-403 to manufacturers in drums, IBC totes and bulk volumes. Provide your target volume and ship-to location for current pack sizes, MOQ and pricing, with CoA and SDS available per lot.
What is the REACH and TSCA regulatory status of Polyetheramine T-403 (Trifunctional Polyether Triamine)?
Polyetheramine T-403 (Trifunctional Polyether Triamine) (CAS 39423-51-3) is subject to U.S. TSCA Inventory requirements; supplying it into the EU requires valid REACH registration ((EC) No 1907/2006). RawSource cannot verify a third-party supplier's registrations — buyers should require documented TSCA and REACH compliance for their jurisdiction and volume (EC 500-105-6).