Plastics & Polymers / Solution Family

Photoinitiators

Seven photoinitiators, plus a diacrylate monomer, for UV-cured castings, composites, electronics and 3D-printing resins, from deep-curing BAPO and TPO to low-yellowing HMPP and MBF.

Overview

For UV-cured plastics work (castings, composites, electronics, 3D-printing resins and plastic finishes), match the initiator to the section thickness and the pigment load. RawSource supplies seven photoinitiators and one reactive diluent in this family. Two of them are acylphosphine oxides to start from for thick or pigmented sections: BAPO, described for deep through-cure in pigmented UV and LED systems, thick castings and composites, and TPO, which absorbs near-UV and violet light at about 380 to 420 nm.

The rest split by mechanism. 2-Hydroxy-2-methylpropiophenone (HMPP) is a liquid alpha-hydroxyketone and methyl benzoylformate (MBF) a liquid phenylglyoxylate; both cleave directly under UV for surface cure. Benzil dimethyl ketal (BDK) is a crystalline Type I initiator for fast deep and surface cure of clear systems. 4-Chlorobenzophenone is a Type II initiator used with amine co-initiators, and DETX, a thioxanthone, is used with an amine synergist. TPGDA is a diacrylate monomer, not a photoinitiator; its record lists viscosity modification, crosslinking and film formation.

A common starting point is a blend: BAPO or TPO for depth, plus a surface initiator such as HMPP for the surface. The trade-off is color. BAPO and TPO are yellow to pale-yellow solids and DETX is yellow, so a water-white casting can lean on HMPP or MBF, which their records describe as low-yellowing, and keep the phosphine oxide to the amount the depth needs.

Where it's used
  • Thick castings and composites (BAPO)
  • Electronics and 3D printing (BAPO)
  • 3D-printing inks and plastic finishes (TPO)
  • Clear UV castings and electronics (BDK)
Frequently asked questions
Which photoinitiator cures a thick or pigmented casting?
Start with BAPO, a bis-acylphosphine oxide that its product record describes for deep through-cure in pigmented UV and LED systems, thick castings and composites. TPO, an acylphosphine oxide with absorption at about 380 to 420 nm, is used for through-cure in clear and pigmented systems, and the two are blended for heavily pigmented films.
What is the difference between Type I and Type II photoinitiators?
A Type I initiator cleaves under UV light on its own; the product records describe MBF, BDK, TPO and BAPO as Type I, and HMPP as cleaving under UV. A Type II initiator such as 4-chlorobenzophenone is used with an amine co-initiator, and DETX is likewise paired with an amine synergist.
Why blend a surface initiator with TPO or BAPO?
The phosphine oxides are used for through-cure, and a surface initiator such as HMPP handles the surface cure. The product records describe HMPP as typically blended with TPO, and BAPO as often paired with a surface-curing hydroxyketone.
Does RawSource supply these materials in bulk?
Yes. RawSource sources all eight materials on this page. Send the CAS number, grade and target volume with an RFQ for current availability and pricing.
Disclaimer. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
Request Quote Product Page