Plastics & Polymers / Solution Family

Epoxy Cure Accelerators and Catalysts

Two epoxy cure catalysts for plastics and composites: a liquid tertiary-amine accelerator for amine and anhydride cures, and triphenylphosphine flake.

Overview

Two cure catalysts for epoxy plastics and composites. 2,4,6-tris(dimethylaminomethyl)phenol (CAS 90-72-2) is a liquid tertiary-amine accelerator that its product record describes for epoxy resins cured with amine and anhydride hardeners, in adhesives and composites. Triphenylphosphine (TPP, CAS 603-35-0) is a phosphine supplied as white flake, melting at 79 to 82 °C, used as a catalyst for polymerization reactions, epoxy curing among them.

The two suit different processes. The amine accelerator is a liquid; triphenylphosphine is a solid flake, and its RawSource specification caps triphenylphosphine oxide at 0.5% and chloride at 15 ppm. Choose by the hardener chemistry and the form your process can take, and trial the dose on a test batch before scale-up.

Where it's used
  • Epoxy composites (tertiary-amine accelerator)
  • Anhydride-cured epoxy systems (tertiary-amine accelerator)
  • Epoxy curing catalyst (triphenylphosphine)
  • Epoxy adhesives (tertiary-amine accelerator)
Frequently asked questions
How do the two catalysts on this page differ?
2,4,6-tris(dimethylaminomethyl)phenol is a liquid tertiary-amine accelerator used with amine and anhydride hardeners. Triphenylphosphine is a phosphine catalyst supplied as white flake, melting at 79 to 82 degrees C. Choose by the hardener chemistry and by whether your process takes a liquid or a solid.
How should the catalyst dose be set?
There is no single figure on this page. Trial the dose against the working time and cure your process needs, on a test batch before scale-up.
What specification does RawSource triphenylphosphine meet?
The RawSource grade is white flake with triphenylphosphine oxide at 0.5% maximum, chloride at 15 ppm and a melting point of 79 to 82 degrees C, supplied in bags or bulk.
Does RawSource supply these catalysts in bulk?
Yes. Send the CAS number, grade and target volume with an RFQ for current availability and pricing.
Disclaimer. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
Request Quote Product Page