Glycols & Polyols Available — Bulk Only

Polytetramethylene ether glycol (Mn ~1000)

CAS 25190-06-1 · Polymer no single formula or molecular weight

A soft-segment polyether polyol for cast and thermoplastic polyurethane elastomers, spandex fibers.

Request SDS
CAS Number
25190-06-1
Material Family
Glycols & Polyols
At a Glance
Material Family
Glycols & Polyols
Primary Role
Film Formation
Functional Roles
Polytetramethylene ether glycol, Mn 1000 (PTMEG)
Product code
RS-PTMEG_1000
Molecular Weight
1,000±50
Hydroxyl Value
112.5±5.6 mg KOH/g
Moisture
100 ppm
Acid Value
0.05 mg KOH/g max
Color, APHA
20 max
Packaging
200 kg drums, 1,000 kg IBC

Supplied for industrial formulation and manufacturing use; not for retail or consumer sale.

Documents
Applications & Use Cases
  • ▸ Soft-segment polyether polyol (Mn ~1000) for cast and TPU polyurethane elastomers
  • ▸ Key raw material for spandex/elastane fiber production
  • ▸ Imparts hydrolysis resistance, low-temperature flexibility and resilience to PU
Safety & Handling
Full SDS available on request

A grade-specific Safety Data Sheet (SDS) — with the complete hazard classification, handling precautions, and transport information — is supplied with every shipment and available on request. Confirm all safety and regulatory details against the SDS for your specific grade.

Request SDS →
Chemical Identity
CAS Number
25190-06-1
Identity basis
Polymer: no single compound, formula or molecular weight
Full Description

Soft-segment polyether polyol (Mn ~1000) for cast and TPU polyurethane elastomers Key raw material for spandex/elastane fiber production Imparts hydrolysis resistance, low-temperature flexibility and resilience to PU

Used with

Substances this product is used with, each from a cited source or from the product’s own technical data.

  • Methylene Diphenyl Diisocyanate (MDI): with 1,4-butanediol at a 1:3:2 polyol/MDI/butanediol molar ratio, gives a polyurethane with a 100% modulus of 14.39 MPa and 420% elongation at break in one published study. (Polymers, 2019)
  • para-Phenylene Diisocyanate (PPDI): fed with this glycol at about 2:1 by moles into a twin-screw extruder, gives a prepolymer of 6.3% NCO in one published example. (EP 0 316 150 B1)

Alternatives

Each alternative holds only under the condition given with it.

  • Polytetramethylene Ether Glycol: the 2000 g/mol grade gives a softer, more extensible MDI and 1,4-butanediol polyurethane at the same 1:3:2 molar ratio (rigid-segment fraction 0.32 against 0.48). By weight, the mix ratio changes. (Polymers, 2019)

Made into

What this product is a raw material for.

  • thermoplastic polyurethane and cast elastomer: this glycol is a raw material for both.

For industrial and professional use only. Not for supply to the general public.

Safety Data Sheet: provided before or with your first shipment. Request it with your quotation.

Regulatory & registration requirements

  • TSCA (US):
  • REACH (EU): Not determined from public registry
  • EC number: 607-637-9

TSCA Inventory flag XU: a substance exempt from reporting under the Chemical Data Reporting Rule (40 CFR 711) (EPA flag legend).

Source: EPA TSCA Inventory (July 2025 release) · ECHA CHEM — retrieved 2026-07-12

Frequently Asked Questions

What is Polytetramethylene ether glycol (Mn ~1000) (CAS 25190-06-1)?

Polytetramethylene ether glycol (Mn ~1000) (CAS 25190-06-1) is a film formation agent supplied by RawSource in bulk. Soft-segment polyether polyol (Mn ~1000) for cast and TPU polyurethane elastomers

What is the REACH and TSCA regulatory status of Polytetramethylene ether glycol (Mn ~1000)?

Polytetramethylene ether glycol (Mn ~1000) (CAS 25190-06-1) is listed as Active on the U.S. EPA TSCA Inventory; its REACH registration status is not determined from the public ECHA registry.

Which specification values does the Mn 1000 polytetramethylene ether glycol grade carry?

The Mn 1000 grade RS-PTMEG_1000 is specified at a molecular weight of 1,000±50 and a hydroxyl value of 112.5±5.6 mg KOH/g. Moisture is specified at 100 ppm (typical 27 ppm), acid value at 0.05 mg KOH/g max and APHA color at 20 max, with a BHT content of 250±50 ppm.

How does a 1000 g/mol PTMEG compare with a 2000 g/mol PTMEG in an MDI and 1,4-butanediol polyurethane?

In a 2019 Polymers study, 1000 g/mol PTMEG gave a stiffer polyurethane than 2000 g/mol: 100 % modulus 14.39 MPa against 6.8 MPa, and elongation at break 420 % against 600 %. Both were made from MDI and 1,4-butanediol at a 1:3:2 polyol/MDI/butanediol molar ratio by a two-step prepolymer route and tested as moulded (tensile per ISO 527-3), so the 1000 g/mol polymer has the higher rigid-segment fraction calculated from composition, 0.48 against 0.32.

Disclaimer. Information on this page — including properties, identifiers, hazard, transport (DOT/UN) and tariff (HS) classifications, and applications — is provided for general reference and is compiled from authoritative public sources (e.g. PubChem/ECHA, 49 CFR 172.101, the Harmonized Tariff Schedule). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot purchased governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim or advice. Always consult the current Safety Data Sheet (SDS) before handling, storage, transport or disposal, and confirm regulatory status, classification and suitability for your application and jurisdiction. Hazard, transport and tariff classifications must be verified for your specific shipment. RawSource makes no warranty, express or implied, and assumes no liability for use of this information. Trademarks. Third-party trademarks and brand names are the property of their respective owners; any reference is nominative — used only to identify a comparable product — and does not imply affiliation with, sponsorship by, or endorsement by the trademark owner.