- ▸ Hydrophilic reactive modifier in waterborne epoxy and polyurea systems
- ▸ Improves water-dispersibility and flexibility of amine-cured coatings
- ▸ Chain-stopper / modifier with primary diamine epoxy curatives
A grade-specific Safety Data Sheet (SDS) — with the complete hazard classification, handling precautions, and transport information — is supplied with every shipment and available on request. Confirm all safety and regulatory details against the SDS for your specific grade.
Request SDS →
Polyetheramine M-1000 is a polyether monoamine (comparable to Jeffamine M-1000) — a single amine-terminated poly(ethylene glycol) (~1000 MW) used as a reactive modifier, chain stopper, dispersant and surfactant building block. Identity: CAS 83713-01-3.
What it is
Polyetheramine M-1000 (CAS 83713-01-3) is a grade-defined polyether monoamine with one terminal primary amine on a poly(ethylene glycol) chain. The monofunctionality makes it a modifier/chain stopper rather than a crosslinker.
How it cures
Its single amine reacts into epoxy or with isocyanates as a chain stopper or reactive flexibilizer, and its polyether tail gives surfactant/dispersant and water-compatibility properties — used to modify networks and as a building block.
Applications
Polyetheramine M-1000 is used in water-soluble reactive surfactants, dispersants and modifiers. Difunctional grades for crosslinking: D-230 and D-2000.
Forms, grades and handling
Supplied as a clear liquid in drums, IBCs and bulk; grade defined by molecular weight. Properties are typical reference values; the Certificate of Analysis (CoA) for the lot you buy governs. Amine curing agents are typically corrosive and can sensitize skin — handle per the current Safety Data Sheet (SDS). Each lot ships with CoA, TDS and SDS.
Bulk supply and RFQ
RawSource sources Polyetheramine M-1000 direct from producers in bulk, with CoA, TDS and SDS per lot. Tell us your resin system, cure schedule (ambient or heat) and the properties you need (pot life, Tg, flexibility, chemical resistance), and we will quote the right hardener. See selection logic in the epoxy curing agents guide.
Typical Properties
Typical reference values, not a specification; the Certificate of Analysis (CoA) for the lot governs.
| Property | Typical Value |
|---|---|
| Chemical / class | Polyether monoamine |
| Cure role | Reactive modifier / surfactant |
| CAS Number | 83713-01-3 |
| Handling | Refer to the current SDS |
Regulatory & registration requirements
- TSCA (US):
- REACH (EU): Not determined from public registry
- EC number: 617-489-7
TSCA Inventory flag XU: a substance exempt from reporting under the Chemical Data Reporting Rule (40 CFR 711) (EPA flag legend).
Source: EPA TSCA Inventory (July 2025 release) · ECHA CHEM — retrieved 2026-07-12
Frequently Asked Questions
What is Polyetheramine M-1000 used for?
Polyetheramine M-1000 (CAS 83713-01-3, comparable to Jeffamine M-1000) is a polyether monoamine (~1000 MW) used as a reactive modifier, chain stopper, dispersant and surfactant building block in epoxy and polyurethane systems.
How is bulk Polyetheramine M-1000 supplied and quoted?
RawSource supplies Polyetheramine M-1000 in bulk with CoA, TDS and SDS per lot. Pricing is quote-based on grade and volume; submit an RFQ with your resin system and cure schedule.
What is the REACH and TSCA regulatory status of Polyetheramine M-1000 (Polyether Monoamine)?
Polyetheramine M-1000 (Polyether Monoamine) (CAS 83713-01-3) is listed as Active on the U.S. EPA TSCA Inventory; its REACH registration status is not determined from the public ECHA registry.