Solution Approach
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
System Assessment
Characterize operating conditions — fluid composition, temperature, pressure, flow, and H2S/CO2/water cut — and benchmark current treatment performance.
2
Chemistry Selection
Match scale and corrosion inhibitors, biocides, or demulsifiers to the operating envelope, factoring compatibility, regulatory constraints, and downstream impacts.
3
Field Trial & Dosing
Determine treat rates through bottle and field trials, and configure continuous or batch delivery and packaging (drums, totes, ISO tanks) to logistics.
4
Monitoring & Adjustment
Track corrosion coupon/ER rates, residual inhibitor, and separator and water-quality performance, adjusting chemistry and dose as wells change.
Recommended Chemistries (6)
Ethylene Glycol Monobutyl Ether
CAS 111-76-2
Glycols & Polyols
Carrier/solvent
1993 (ETHYLENE GLYCOL MONOBUTYL ETHER) · Class Coupling solvent in aqueous cleaning blends that lifts hydrocarbon residue from pipe walls
Melting Point: -70 °C Boiling Point: 171 °C at 743 mmHg Density: 0.902 at 20 °C
Quick view
Full Details
Sodium Lauryl Sulfate (SLS)
CAS 151-21-3
Surfactants
Cleaning / Degreasing
Anionic surfactant that emulsifies oil films for water-flush pigging trains
Melting Point: 204–207 °C Density: > 1.1 at 20 °C Solubility: < 1 mg/mL at 19 °C
Quick view
Full Details
Hydroxypropyl guar
CAS 39421-75-5
Specialty Additives
Cleaning / Degreasing
Water-thickening polymer used to build viscous gel pigs that carry debris and separate fluids
Quick view
Full Details
Carboxymethyl cellulose (CMC)
CAS 9004-32-4
Specialty Additives
Surfactancy
Cellulosic thickener for gel-pig and spacer fluid viscosity
Solubility: Yields a viscous colloidal solution with water.… PH: Not < 5,0 and not more than 8,5 (1 % colloidal …
Quick view
Full Details
Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS)
CAS 55566-30-8
Specialty Additives
Biocide, good in sulfide systems
2922 (TETRAKIS(HYDROXYMETHYL)PHOSPHONIUM SULFATE SOLUTION) · Class Canonical fast-kill oilfield biocide dosed into hydrotest/commissioning water to control SRB, biofilm, and MIC in newly laid pipe. Exact-use fit for pipeline pre-commissioning cleaning support.
Melting Point: -35 °C Boiling Point: 111 °C at 760 mmHg Density: 1.381 at 22 °C
Quick view
Full Details
Polyethylene-Polypropylene Glycol
CAS 9003-11-6
Glycols & Polyols
Separation aid
EO/PO block copolymer (Pluronic/poloxamer class) with genuine oilfield/industrial use as a low-foam nonionic wetting agent and demulsifier. Low-foam control is specifically needed in flush/displacement so foam does not interfere with pig travel and water displacement during pigging and commissioning.
Quick view
Full Details
Related Product Families
● Sourcing-only
Demulsifiers / Deoilers
Surfactant blends and EO/PO copolymers for crude/water separation
Emulsion BreakingSeparation
5 chemistries
View family
● Sourcing-only
Biocides
Glutaraldehyde, THPS, quaternary ammonium, and oxidizing biocides for water handling
Microbial ControlBiofilm
13 chemistries
View family