繊維 / ソリューションファミリー

精練・漂白用薬剤

Caustic soda and hydrogen peroxide actives with EDTA/DTPA chelants and sodium silicate, sodium metasilicate, and magnesium sulfate stabilizers for greige-goods preparation before dyeing.

概要

精練・漂白薬剤は、天然のワックス、油分、種子殻由来の不純物を除去し、繊維を白化することで、生機(織り上がりの状態)を染色に向けて前処理します。 精練漂白の一浴処理は2つの有効成分で成り立ちます:ワックスをけん化するアルカリである caustic soda (sodium hydroxide、CAS 1310-73-2) と、漂白酸化剤である hydrogen peroxide (CAS 7722-84-1) です。ライン時間に余裕がない場合は一浴で行い、処理量よりも繊維損傷の管理を優先する場合は分けて行います。

Alkaline hydrogen peroxide decomposes too fast if trace iron, copper, or manganese are present, and uncontrolled decomposition pits the fiber. Two tools manage this. Chelants u2014 EDTA (CAS 60-00-4) and the stronger DTPA (CAS 67-43-6) u2014 sequester the trace metals; silicate stabilizers such as sodium metasilicate (CAS 6834-92-0) buffer the bath and slow peroxide release. The trade-off is real: more peroxide whitens faster but raises the risk of tendering, so stabilizer dose, not oxidant dose, is the control lever.

Soda ash (sodium carbonate, CAS 497-19-8) sets the milder alkalinity used to buffer scour and reactive-dye baths, where full-strength caustic would be too harsh. For mercerizing-grade swelling you still need concentrated caustic soda; for routine scouring, build the bath from soda ash plus a wetting agent and reserve caustic for wax-heavy goods. Sequence the chelant ahead of the peroxide so metals are tied up before the oxidant is charged.

主な用途
  • 綿生機のワックス、ペクチン、油分を除去するアルカリ精練
  • Hydrogen peroxide bleaching of cellulosics for uniform whiteness before dyeing
  • 連続加工ライン向けの精練・漂白同時(一浴)前処理
  • 繊維の脆化を防ぐための過酸化水素浴の安定化と金属イオン制御
  • soda ash による反応染料浴および前処理浴のアルカリ緩衝
よくあるご質問
綿の精練・漂白にはどのような薬剤が使われますか?
綿の前処理では、天然のワックスや油分をけん化して除去するために caustic soda (sodium hydroxide) を用い、白度を上げる漂白酸化剤として hydrogen peroxide を用います。浴には微量金属を制御するキレート剤(EDTA、DTPA)と、過酸化物の分解を抑えるケイ酸塩または magnesium sulfate 系の安定剤も含まれます。Soda ash は穏和なアルカリ緩衝作用をもたらします。
過酸化水素漂白に安定剤とキレート剤が必要なのはなぜですか?
微量のiron、copper、manganeseはアルカリ性hydrogen peroxideの急激で制御不能な分解を触媒し、繊維に孔食を生じさせて強度を低下させます(テンダリング)。EDTAやDTPAなどのキレート剤はこれらの金属を封鎖し、silicate系安定剤は過酸化物の放出を緩やかにして漂白を均一にします。キレート剤は過酸化物を投入する前に添加してください。
繊維の前処理におけるcaustic sodaとsoda ashの違いは何ですか?
Caustic soda (sodium hydroxide) is the strong alkali used for heavy scouring and for mercerization, where high concentration swells the fiber. Soda ash (sodium carbonate) is a milder alkali used to buffer scour and reactive-dye baths where full-strength caustic would be too harsh. Many routine scour baths use soda ash plus a wetting agent.
RawSourceは繊維用の精練・漂白薬剤をバルクで供給していますか?
はい。RawSourceは苛性ソーダ、過酸化水素、EDTAおよびDTPA系キレート剤、ソーダ灰、ケイ酸塩および硫酸マグネシウム系の過酸化物安定剤を、いずれも検証済みのCAS番号とSDS/TDSを添付してバルクで調達します。繊維種、浴の構成、目標白度をRFQに添えてお送りください。
免責事項。 Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
見積り依頼 製品ページ

製品カタログ →