繊維 / ソリューションファミリー

糊抜き剤

染色前の生機から澱粉、PVA、CMCを除去する酵素および酸化による糊抜き — アミラーゼ、過酸化水素、過硫酸ナトリウム、および酢酸による浴調整。

概要

糊抜き剤は、製織前に糸へ付与された経糸糊 — starch、polyvinyl alcohol (PVA)、carboxymethyl cellulose (CMC) — を除去し、生地が精練液、漂白液、染料を均一に吸収できるようにします。 方法は2つで、amylaseがでんぷんを可溶性の糖に加水分解する酵素糊抜きと、過酸化物または過硫酸塩が天然・合成両方の糊剤を分解する酸化糊抜きです。方法は慣習ではなく、布に付いている糊剤の化学構造を基準に選定してください。

Amylase is specific. It cleaves starch at roughly 55-70°C within a narrow pH window, which is why a small acetic-acid addition is used to trim the bath to the enzyme's optimum. Because it targets only starch, it leaves the cotton fiber intact. Specify enzymatic desizing when the size is starch-based and fiber strength is the priority. The limit is real: amylase does nothing to PVA or acrylic sizes.

Oxidative desizing covers what enzymes miss. Sodium persulfate and hydrogen peroxide break down PVA and mixed-size systems, and an oxidative bath can combine size removal with bleaching in one step. The cost is selectivity: a strong oxidizer run too hot or too long can attack cellulose and lower fabric strength. For PVA or blended sizes, use the oxidative route and hold concentration, temperature, and dwell time to the size load.

主な用途
  • 精練前の綿および綿混紡生機からの澱粉糊の酵素分解除去
  • アミラーゼでは分解できないPVA、CMC、混合糊剤の経糸糊の酸化糊抜き
  • 酸化剤が一工程で糊を除去し白度を上げる糊抜き・漂白同時浴
  • アミラーゼを最適作用域に保つための酵素糊抜き浴のpH調整
  • 後工程の染色における濡れ性と染料吸尽を高めるための織物の前処理
よくあるご質問
繊維用糊抜き剤とは何ですか?
糊抜き剤は、製織時に経糸を保護するために付与された糊剤 (デンプン、PVA、CMC) を除去します。精練・染色の前に糊を除くことで、生地が均一に濡れ、染料を均一に吸収できます。方法は酵素法 (デンプンを加水分解する amylase) と酸化法 (天然糊と合成糊の両方を分解する hydrogen peroxide または sodium persulfate) の2通りです。
酵素糊抜きと酸化糊抜き — どちらを使うべきですか?
糊剤の種類に応じて糊抜き方法を選定します。でん粉系の糊剤にはamylaseが適しており、選択性が高く綿繊維を損ないません。amylaseでは分解できないPVAや混合糊剤の系ではsodium persulfateまたはhydrogen peroxideによる酸化糊抜きが必要で、糊抜きと漂白を同時に行える一方、選択性は低下します。
RawSourceは繊維用糊抜き剤をバルクで供給していますか?
はい。RawSourceはアミラーゼ酵素、酢酸、過酸化水素、過硫酸ナトリウムを、検証済みのCAS番号とSDS/TDSを添付してドラム、トート、バルクの各数量で調達します。繊維種、糊剤の種類、加工方法を添えてRFQをご送信ください。
Hydrogen peroxide は一浴で糊抜きと漂白を同時に行えますか?
はい。酸化性の浴では糊抜きと白度向上を1工程で行えるため、前処理工程を短縮できます。トレードオフは選択性で、強い酸化剤を高温または長時間で作用させるとセルロースを攻撃して布の強度を低下させるため、濃度、温度、浸漬時間を糊の付着量に合わせて管理する必要があります。
免責事項。 Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
見積り依頼 製品ページ

製品カタログ →