Eliminación enzimática y oxidativa del apresto — amilasa, peróxido de hidrógeno y persulfato de sodio, con acondicionamiento del baño con ácido acético — para retirar almidón, PVA y CMC de la tela cruda antes de la tintura.
Los agentes desencolantes retiran el apresto de urdimbre — almidón, polyvinyl alcohol (PVA) o carboxymethyl cellulose (CMC) — aplicado al hilo antes del tejido, para que la tela absorba de manera uniforme el descrude, el blanqueo y el colorante. Dos rutas hacen el trabajo: el desencolado enzimático, en el que la amilasa hidroliza el almidón en azúcares solubles, y el desencolado oxidativo, en el que el peróxido o el persulfato degradan tanto los encolantes naturales como los sintéticos. Elija la ruta según la química del encolante presente en la tela, no por costumbre.
Amylase is specific. It cleaves starch at roughly 55-70°C within a narrow pH window, which is why a small acetic-acid addition is used to trim the bath to the enzyme's optimum. Because it targets only starch, it leaves the cotton fiber intact. Specify enzymatic desizing when the size is starch-based and fiber strength is the priority. The limit is real: amylase does nothing to PVA or acrylic sizes.
Oxidative desizing covers what enzymes miss. Sodium persulfate and hydrogen peroxide break down PVA and mixed-size systems, and an oxidative bath can combine size removal with bleaching in one step. The cost is selectivity: a strong oxidizer run too hot or too long can attack cellulose and lower fabric strength. For PVA or blended sizes, use the oxidative route and hold concentration, temperature, and dwell time to the size load.
Utilizamos cookies y tecnologías similares con fines analíticos y para mejorar nuestro sitio y — con su consentimiento — para marketing e identificación de visitantes B2B. Elija qué desea permitir. Consulte nuestra Política de Privacidad.