Resina de poliuretano para telas recubiertas, dimetilformamida como solvente del proceso de coagulación húmeda y carga de carbonato de calcio para recubrimiento y laminación textil.
Las químicas de recubrimiento y laminación textil aplican o adhieren una capa de polímero a la tela para agregar función — resistencia al agua, resistencia a la abrasión, un tacto tipo cuero. El formador de película base de la mayoría de los tejidos recubiertos y cueros sintéticos es el poliuretano (PU). En el proceso con solvente (coagulación por vía húmeda), el PU se disuelve en dimetilformamida (DMF) y se coagula en un baño de agua para construir la estructura microporosa y transpirable; se agrega carbonato de calcio como carga para ajustar el tacto y el costo.
The genuine trade-off sits in the solvent. DMF gives PU coagulation its established morphology and surface finish, but it is a restricted substance, which is pushing finishers toward water-based PU dispersions and solvent-free hot-melt lamination. Those routes cut the solvent burden; they do not yet match every hand and breathability spec the DMF route delivers. Decide early which process you are building for, because the PU grade, the filler loading, and the line are not interchangeable between them.
Calcium carbonate is the standard mineral filler in coating compounds: it extends the polymer, controls viscosity and opacity, and lowers compound cost without driving the cure chemistry. Dose it to the rheology and hand you need rather than to a fixed ratio. On DMF, note the regulatory status plainly: it is identified as a substance of very high concern under EU REACH and carries a REACH restriction with a workplace concentration limit. Confirm regulatory status for your application and jurisdiction.
Utilizamos cookies y tecnologías similares con fines analíticos y para mejorar nuestro sitio y — con su consentimiento — para marketing e identificación de visitantes B2B. Elija qué desea permitir. Consulte nuestra Política de Privacidad.