Resina de poliuretano para tecidos revestidos, dimetilformamida como solvente do processo de coagulação úmida e carga de carbonato de cálcio para revestimento e laminação de têxteis.
Químicas de revestimento e laminação têxtil aplicam ou aderem uma camada polimérica ao tecido para agregar função — resistência à água, resistência à abrasão, toque semelhante a couro. O formador de filme base da maioria dos tecidos revestidos e couros sintéticos é o poliuretano (PU). No processo com solvente (coagulação por via úmida), o PU é dissolvido em dimetilformamida (DMF) e coagulado em banho de água para construir a estrutura microporosa e respirável; carbonato de cálcio é adicionado como carga para ajustar o toque e o custo.
The genuine trade-off sits in the solvent. DMF gives PU coagulation its established morphology and surface finish, but it is a restricted substance, which is pushing finishers toward water-based PU dispersions and solvent-free hot-melt lamination. Those routes cut the solvent burden; they do not yet match every hand and breathability spec the DMF route delivers. Decide early which process you are building for, because the PU grade, the filler loading, and the line are not interchangeable between them.
Calcium carbonate is the standard mineral filler in coating compounds: it extends the polymer, controls viscosity and opacity, and lowers compound cost without driving the cure chemistry. Dose it to the rheology and hand you need rather than to a fixed ratio. On DMF, note the regulatory status plainly: it is identified as a substance of very high concern under EU REACH and carries a REACH restriction with a workplace concentration limit. Confirm regulatory status for your application and jurisdiction.
Utilizamos cookies e tecnologias semelhantes para fins analíticos e para melhorar o nosso Site e — com o seu consentimento — para marketing e identificação de visitantes B2B. Escolha o que pretende permitir. Consulte a nossa Política de Privacidade.