Wasserbehandlung / Lösungsfamilie

Sauerstoffbindemittel

Katalysierte Sauerstoffbindemittel auf Sulfit- und Bisulfitbasis — sodium sulfite, sodium bisulfite und ammonium bisulfite — zur Entfernung von gelöstem Sauerstoff aus Kesselspeisewasser und Entgaser-Ablauf.

Überblick

Sauerstoffbindemittel sind Reduktionsmittel, die dem Kesselspeisewasser zugesetzt werden, um den nach der mechanischen Entgasung verbleibenden gelösten Sauerstoff zu entfernen und so Sauerstoff-Lochkorrosion an Speisewasserleitungen, Entgaser und Kesselrohren zu verhindern. Scavenger auf Sulfitbasis reagieren mit gelöstem Sauerstoff zu Sulfat; katalysierte Qualitäten, beschleunigt mit einer Spur Cobalt, reagieren schnell genug, um den Sauerstoff in den wenigen Sekunden Kontaktzeit zu binden, die eine Speisewasserleitung zulässt. Dosieren Sie auf einen kleinen gemessenen Restgehalt statt auf eine feste Dosierrate.

Sodium sulfite, sodium bisulfite, and ammonium bisulfite cover most low- and medium-pressure boilers. They are inexpensive and fast, but each reaction adds dissolved solids to the boiler water, which raises blowdown and the heat lost with it. Sulfite chemistry also has a ceiling: above roughly 900 psi it can break down to corrosive sulfur dioxide and hydrogen sulfide that carry into the steam. Keep sulfite programs within the pressure range the boiler maker allows.

Above that range, plants switch to volatile organic scavengers such as DEHA or carbohydrazide, which add no dissolved solids and carry forward to passivate the condensate system. RawSource currently sources the sulfite-based scavengers rather than the organic ones, so for high-pressure service confirm the chemistry and grade against your boiler's pressure rating before specifying. Ammonium bisulfite suits oilfield and pipeline water but releases ammonia, which is incompatible with copper alloys.

Wo es eingesetzt wird
  • Entfernung von gelöstem Sauerstoff aus Entgaser-Ablauf und Kesselspeisewasser
  • Sauerstoffkontrolle in Niederdruck- und Mitteldruck-Kesselanlagen
  • Sauerstoffbindung in Ölfeld, Lagerstättenwasser und Pipeline (Ammoniumbisulfit)
  • Entchlorung von Restchlor mit Reduktionsmitteln vor RO/NF-Membranen
  • Unterstützung der Metallpassivierung im Speisewasser neben Amin- und Phosphatprogrammen
Häufig gestellte Fragen
Was ist ein Sauerstoffbindemittel und warum wird es im Kesselspeisewasser eingesetzt?
Ein Sauerstoffbindemittel ist ein Reduktionsmittel, das nach der mechanischen Entgasung dosiert wird, um den im Speisewasser noch verbliebenen gelösten Sauerstoff zu entfernen und so Sauerstoff-Lochkorrosion an Entgaser, Speisewasserleitungen und Kesselrohren zu verhindern. Sulfitbasierte Bindemittel reagieren mit dem Sauerstoff zu Sulfat; katalysierte Qualitäten reagieren schnell genug für die kurze Kontaktzeit in einer Speisewasserleitung.
Sodium sulfite or an organic scavenger (DEHA / carbohydrazide)?
Sodium sulfite is cheap and fast and works well for low- and medium-pressure boilers, but it adds dissolved solids (raising blowdown) and is generally limited below about 900 psi, where it can decompose. Volatile organic scavengers such as DEHA or carbohydrazide add no solids and passivate the condensate, at higher cost; use them above the boiler maker's sulfite limit.
Funktioniert Natriumsulfit bei hohem Druck?
Grundsätzlich nein. Die Sulfitchemie hat eine praktische Obergrenze bei etwa 900 psi; darüber kann sie zu korrosivem Schwefeldioxid und Schwefelwasserstoff zerfallen, die in den Dampf übergehen. Setzen Sie für Hochdruckkessel einen für den Druck freigegebenen flüchtigen organischen Scavenger statt Sulfit ein. Bestätigen Sie die Grenze immer beim Kesselhersteller.
Liefert RawSource Sauerstoffbindemittel in Großmengen?
Ja. RawSource beschafft Natriumsulfit (katalysierte Qualität verfügbar), Natriumbisulfit und Ammoniumbisulfit in Fässern, IBC und Großmengen. Geben Sie an, ob Sie eine katalysierte Qualität benötigen, sowie den Kesseldruckbereich und die Zieldosierung, damit das Beschaffungsteam den passenden Scavenger und die passende Konzentration auswählen kann.
Haftungsausschluss. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
Angebot anfordern Produktseite

Katalog auf Deutsch →