Wasserbehandlung / Lösungsfamilie

Nicht oxidierende Biozide

Organische Wirkstoffe zur mikrobiologischen Kontrolle in Industriewasser — DBNPA, Glutaraldehyd, Benzalkoniumchlorid und die Isothiazolinone — für Kühl-, Membran- und Abwasserprogramme, in denen ein Oxidationsmittel allein nicht ausreicht.

Überblick

Nicht oxidierende Biozide sind organische mikrobizide Wirkstoffe, die zur mikrobiologischen Kontrolle in industrielle Wassersysteme dosiert werden — sie beherrschen Bakterien, Pilze und Biofilm, ohne auf eine Oxidationsreaktion zu setzen. Anders als Chlor oder Peroxid bleiben sie über ein breiteres pH-Band aktiv und werden nicht von Ammoniak oder organischer Last verbraucht, weshalb Kühlturm- und Membranprogramme meist ein Nichtoxidationsmittel mit einem Oxidationsmittel kombinieren, statt sich für eines allein zu entscheiden. Die Arbeitspferde der Wasserbehandlung sind DBNPA, glutaraldehyde, quartäre Ammoniumverbindungen und die Isothiazolinone.

Non-oxidizing actives are specified where an oxidizer will not hold: high-pH cooling water, systems with heavy organic load, and RO membranes that free chlorine would damage. The honest trade-off is cost and handling. Non-oxidizers run several times the per-dose cost of hypochlorite and many cannot share a feed line, so a program alternates two chemistries rather than over-relying on one. Rotate actives on a defined schedule to manage slime regrowth and resistance.

DBNPA is the fast-release, short-half-life choice for slug dosing and membrane systems; it hydrolyzes quickly, which limits residual carryover. Glutaraldehyde and the quats (benzalkonium chloride) are longer-lasting, broad-range actives common in cooling and oilfield water, while the isothiazolinones (BIT, CMIT/MIT) are low-dose actives used in stored treatment chemistries. Match the active to system pH, contact time, and discharge limits rather than defaulting to one product line.

Wo es eingesetzt wird
  • Mikrobiologische Kontrolle in offenen Kühlturm-Umlaufsystemen
  • Biofilm- und Schleimkontrolle in Prozesswasser mit hohem Oxidationsmittelbedarf
  • Programme zur Biofouling-Kontrolle in RO und Membranen (Membranverträglichkeit ohne Oxidationsmittel)
  • Kontrolle von Schleimbildung und sulfatreduzierenden Bakterien in Ölfeld- und Industriewässern
  • Topf- und Systemkonservierung von Polymer- und Behandlungschemikalienbeständen
Häufig gestellte Fragen
Wofür werden nicht oxidierende Biozide in der Wasserbehandlung eingesetzt?
Non-oxidizing biocides are organic actives used for microbiological control in industrial water systems u2014 cooling towers, RO/membrane trains, oilfield water, and process water. They are specified where an oxidizer is unsuitable, such as high-pH water, water with heavy organic load, or membranes that free chlorine would damage. Common actives include DBNPA, glutaraldehyde, benzalkonium chloride, and the isothiazolinones (BIT, CMIT/MIT).
Wie unterscheiden sich nicht oxidierende von oxidierenden Bioziden?
Oxidierende Biozide (Hypochlorit, Chlordioxid, Peroxid) wirken über Oxidation und sind kostengünstig, werden jedoch von organischer und Ammoniumlast verbraucht und verlieren schnell an Wirkstärke. Nicht oxidierende Biozide wirken über andere Mechanismen, bleiben länger wirksam und vertragen einen breiteren pH-Bereich, bei höheren Kosten pro Dosis. Die meisten Programme wechseln zwischen beiden ab, statt sich auf eine Chemie zu verlassen.
Sind nicht oxidierende Biozide reguliert?
Ja. In den USA sind dies antimikrobielle Pestizide, die unter FIFRA reguliert werden; Wirkstoff und Produkt müssen EPA-registriert sein und gemäß dem EPA-genehmigten Etikett verwendet werden. In der EU unterliegen sie der Biozidprodukte-Verordnung (BPR, 528/2012). Prüfen Sie regulatorischen Status, Registrierung und zulässige Anwendungen für Ihre Anwendung und Ihre Rechtsordnung.
Liefert RawSource nicht oxidierende Biozide in Großmengen?
Ja. RawSource beschafft nicht oxidierende Biozide — DBNPA, Glutaraldehyd, Benzalkoniumchlorid und Isothiazolinone — in Fässern, IBC und Großmengen für Wasserbehandlungsprogramme, mit SDS-/TDS-/CoA-Dokumentation. Die Verwendung muss der EPA-Registrierung und dem Etikett des Produkts entsprechen. Reichen Sie CAS, Konzentration und Anwendung mit der RFQ für Preis und Lieferzeit ein.
Haftungsausschluss. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
Angebot anfordern Produktseite

Katalog auf Deutsch →