Ladungsneutralisierende anorganische Koagulationsmittel — aluminum sulfate, ferric chloride und polyferric sulfate — zur Klärung von Roh- und Abwasser und zur chemischen Phosphorelimination.
Anorganische Koagulationsmittel sind Metallsalz-Chemikalien — Aluminium- und Eisen(III)-Salze —, die die negative Oberflächenladung suspendierter Kolloide neutralisieren, sodass Feinpartikel, Färbung und Phosphat aus dem Wasser ausfallen und durch Sedimentation oder Filtration entfernt werden können. In der Wasserbehandlung sind sie der erste chemische Schritt bei der Klärung von Roh-, Prozess- und Abwasserströmen. Stimmen Sie das Koagulationsmittel auf den pH-Wert des Rohwassers und auf den Zielschadstoff ab.
The page carries three charged metal salts, with a real trade-off between cost and pH tolerance. Aluminum sulfate (alum) is the low-cost workhorse, but it works in a narrow band near pH 5.5 to 7.5 and consumes alkalinity. Ferric chloride and polyferric sulfate stay effective across a wider pH range, settle a denser floc, and strip phosphate well — at higher cost and with more corrosive handling. Specify alum for routine clarification at controlled pH; specify the iron salts for cold water, color, phosphorus removal, or variable pH.
Coagulants act in seconds and need rapid mixing; flocculation and settling follow. Jar-test the dose — typical alum doses run tens of milligrams per liter but shift with turbidity and temperature — because overdosing depresses pH and re-stabilizes the particles you meant to drop. Where a permit drives low total phosphorus, the iron salts at a molar Fe:P ratio set by the target residual are the usual route.
Wir verwenden Cookies und ähnliche Technologien für Analysen und zur Verbesserung unserer Website sowie — mit Ihrer Einwilligung — für Marketing und die Identifizierung von B2B-Besuchern. Wählen Sie aus, was Sie zulassen möchten. Siehe unsere Datenschutzerklärung.