수처리 / 솔루션 패밀리

산소 제거제

보일러 급수 및 탈기기 유출수의 용존 산소를 제거하는 촉매형 sulfite·bisulfite 산소 제거제 — sodium sulfite, sodium bisulfite, ammonium bisulfite.

개요

산소 제거제는 기계적 탈기 후 남은 용존 산소를 제거하기 위해 보일러 급수에 첨가하는 환원제로, 급수 배관과 탈기기, 보일러 수관의 산소 공식을 방지합니다. 아황산염계 탈산소제는 용존 산소와 반응하여 황산염을 형성하며, 미량의 코발트로 촉진된 촉매형 그레이드는 급수 라인이 허용하는 수 초의 접촉 시간 안에 산소를 제거할 만큼 빠르게 반응합니다. 고정된 주입률이 아니라 소량의 측정된 잔류 농도를 기준으로 주입하십시오.

Sodium sulfite, sodium bisulfite, and ammonium bisulfite cover most low- and medium-pressure boilers. They are inexpensive and fast, but each reaction adds dissolved solids to the boiler water, which raises blowdown and the heat lost with it. Sulfite chemistry also has a ceiling: above roughly 900 psi it can break down to corrosive sulfur dioxide and hydrogen sulfide that carry into the steam. Keep sulfite programs within the pressure range the boiler maker allows.

Above that range, plants switch to volatile organic scavengers such as DEHA or carbohydrazide, which add no dissolved solids and carry forward to passivate the condensate system. RawSource currently sources the sulfite-based scavengers rather than the organic ones, so for high-pressure service confirm the chemistry and grade against your boiler's pressure rating before specifying. Ammonium bisulfite suits oilfield and pipeline water but releases ammonia, which is incompatible with copper alloys.

사용처
  • 탈기기 유출수 및 보일러 급수의 용존 산소 제거
  • 저압 및 중압 보일러 계통의 산소 제어
  • 유전, 생산수, 파이프라인의 산소 제거 (ammonium bisulfite)
  • RO/NF 막 전단에서 잔류 염소의 환원제 탈염소 처리
  • 아민 및 인산염 프로그램과 병행하는 급수 금속 부동태화 보조
자주 묻는 질문
탈산소제란 무엇이고 보일러 급수에 왜 사용됩니까?
탈산소제는 기계적 탈기 이후 급수에 남아 있는 용존 산소를 제거하기 위해 투입하는 환원제로, 탈기기, 급수 배관, 보일러 튜브의 산소 공식을 방지합니다. 아황산염계 탈산소제는 산소와 반응하여 황산염을 형성하며, 촉매형 그레이드는 급수 라인의 짧은 접촉 시간에도 충분히 빠르게 반응합니다.
Sodium sulfite or an organic scavenger (DEHA / carbohydrazide)?
Sodium sulfite is cheap and fast and works well for low- and medium-pressure boilers, but it adds dissolved solids (raising blowdown) and is generally limited below about 900 psi, where it can decompose. Volatile organic scavengers such as DEHA or carbohydrazide add no solids and passivate the condensate, at higher cost; use them above the boiler maker's sulfite limit.
sodium sulfite는 고압 조건에서도 효과가 있습니까?
일반적으로 그렇지 않습니다. sulfite 계열은 실용 한계가 약 900 psi로, 그 이상에서는 분해되어 부식성 sulfur dioxide와 hydrogen sulfide를 생성하고 이들이 증기에 혼입될 수 있습니다. 고압 보일러에는 sulfite 대신 해당 압력에 맞는 휘발성 유기 탈산소제를 사용하십시오. 한계값은 반드시 보일러 제조사와 확인하십시오.
RawSource는 탈산소제를 벌크로 공급합니까?
네. RawSource는 sodium sulfite(촉매형 그레이드 제공 가능), sodium bisulfite 및 ammonium bisulfite를 드럼, 토트 및 벌크로 소싱합니다. 담당 데스크가 적합한 스캐빈저와 농도를 매칭할 수 있도록 촉매형 그레이드 필요 여부, 보일러 압력 등급 및 목표 주입량을 명시해 주십시오.
면책 조항. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
견적 요청 제품 페이지

전체 제품 카탈로그 →