수처리 pH 조절용 벌크 산 및 알칼리 — 냉각수, 보일러, 막, 폐수 처리 프로그램 전반에서 pH를 높이거나 낮추는 데 사용하는 caustic soda, soda ash, sulfuric acid, hydrochloric acid.
pH 조정 약품은 수처리 프로그램이 처리수를 목표 pH 대역으로 옮기기 위해 사용하는 벌크 산 및 알칼리입니다 — caustic soda 또는 soda ash로 pH를 올리고, sulfuric acid 또는 hydrochloric acid로 내립니다. 이들은 부식성을 관리하고, 응집제와 스케일 방지제가 필요로 하는 운전 범위를 설정하며, 산업 폐수를 방류 허용 기준 내로 맞춥니다. 유입수 pH는 하루 동안 양방향으로 변동하므로 대부분의 프로그램은 산과 염기를 모두 보유합니다.
Caustic soda (sodium hydroxide) is the workhorse alkali for raising pH. It ships as beads or as 50% liquid; the 50% solution starts to freeze near 12 C, so sites that store outdoors in cold climates often specify beads or a diluted strength. Sodium carbonate (soda ash) raises pH more gradually and adds buffering, which suits operators who want to avoid the overshoot a strong base can cause. Specify soda ash where fine control matters more than speed.
On the acid side, sulfuric acid is the lower-cost choice per unit of neutralizing capacity and the default for large-volume pH reduction. Hydrochloric acid is chosen when added sulfate would feed downstream sulfate scaling or interfere with a process. Both are strong mineral acids that demand compatible metallurgy and metered dosing. Match the acid to the water chemistry, not to price alone, because the wrong anion can create a scaling problem the pH correction was meant to prevent.
당사는 분석 및 사이트 개선을 위해, 그리고 — 귀하의 동의가 있는 경우 — 마케팅 및 B2B 방문자 식별을 위해 쿠키와 유사 기술을 사용합니다. 허용 범위를 선택하십시오. 자세한 내용은 다음을 참조하십시오: 개인정보 처리방침.