ソリューションアプローチ
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (2)
DBNPA (2,2-Dibromo-3-Nitrilopropionamide)
CAS 10222-01-2
特殊添加剤
速効性の非酸化性殺菌剤
2923 (2,2-DIBROMO-3-NITRILOPROPIONAMIDE) · Class The standard RO biocide: fast-kill, non-oxidizing and does not attack the polyamide layer; hydrolyzes to low residual, so it can be slug- or continuously dosed
融点:123 to 126 °C 沸点:Decomposes at 190 °C Solubility: In water, 1.5 g/100 mL (15,000 mg/L)
クイックビュー
詳細情報
Isothiazolinone(CMIT/MIT)
CAS 26172-55-4
特殊添加剤
防腐
Non-oxidizing isothiazolinone used for membrane biofilm control and preservation/lay-up; membrane-safe alternative dosing chemistry to DBNPA
融点:54-55 °C 密度:For a mixture of 5-chloro-2-methyl-3(2H)-isothi… Solubility: Solubility in g/100 mL solvent: water, infinite
クイックビュー
詳細情報