ソリューションアプローチ
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (2)
Cyclohexylamine
CAS 108-91-8
アミン・アミド類
High-ratio neutralizing amine
2357 (CYCLOHEXYLAMINE) · Class High distribution ratio carries the amine far down the steam/condensate system, neutralizing carbonic acid and raising pH in remote return lines
融点:-18 °C 沸点:134 °C at 760 mmHg 密度:0.8647 at 25 °C
クイックビュー
詳細情報
Morpholine
CAS 110-91-8
アミン・アミド類
Low-ratio neutralizing amine
2054 (MORPHOLINE) · Class Lower distribution ratio keeps it concentrated near the boiler/early condensate; paired with cyclohexylamine it gives full-length pH protection
融点:-5 °C 沸点:129 °C at 760 mmHg 密度:1 at 20 °C
クイックビュー
詳細情報