水処理/ソリューションファミリー

復水系用アミン

ボイラー蒸気還水ライン全体の炭酸腐食を抑えるため、復水のpHを上げる揮発性中和アミン—cyclohexylamine、morpholine、DEAE。

概要

復水用中和アミンは、復水回収ラインを酸性腐食から保護するために蒸気へ注入される揮発性の塩基性アミンです。 蒸気が溶存二酸化炭素を運ぶと、CO2が凝縮水に溶けて炭酸となり、pHを下げて鉄製配管を腐食させます。中和性アミンは復水のpHを上げますが、どのアミンを選ぶかは、凝縮するまでに系内をどこまで到達するかによって決まります。アミンの分配比を自社の復水系のレイアウトに合わせて選定してください。

The page carries three neutralizing amines, with a real trade-off between reach and dose efficiency. Cyclohexylamine has a high distribution ratio u2014 it volatilizes readily and protects far, low-pressure ends of long return systems, but partitions less into early condensate. Morpholine has a low distribution ratio and protects high-pressure, near-boiler condensate first. DEAE sits between the two. Blend by distribution ratio to hold a uniform pH across the whole system rather than relying on one amine everywhere.

Dose to a target condensate pH u2014 typically pH 8.3 to 9.0 for all-ferrous systems u2014 and verify with field pH and iron testing, not by amine feed rate alone. Where steam contacts food or food-contact surfaces, US FDA 21 CFR 173.310 limits which boiler-water additives are permitted and at what levels; cyclohexylamine, morpholine, and DEAE all appear there with concentration limits. Confirm regulatory status for your application and jurisdiction.

主な用途
  • 蒸気復水回収ラインにおける炭酸(CO2)腐食の中和
  • 低圧・高圧の復水回収系全体で復水のpHを上げて維持
  • 工業用蒸気系におけるボイラー給水および復水配管の保護
  • ボイラー近傍と遠方の復水系の両方をカバーする多種アミンのブレンド
  • 食品・飲料工場の蒸気系(FDAのボイラー添加剤規制の対象)
よくあるご質問
中和性アミンとは何で、どのように作用しますか?
中和性アミンは蒸気中に添加する揮発性の塩基で、復水のpHを上げ、二酸化炭素が凝縮水に溶けて生じる炭酸を中和します。鉄製の還水配管を酸性 (CO2) 腐食から保護します。CO2の発生源そのものを除去するものではなく、溶存ガスは上流の給水脱気と脱酸素処理で対処します。
中和性アミンと皮膜形成アミンの違いは何ですか?
中和性アミンは復水のpHを上げて酸腐食を止め、皮膜性アミンはpHに関係なく金属表面に薄い疎水性のバリアを形成します。Cyclohexylamine、morpholine、DEAE は中和性アミンです。長鎖の皮膜性アミンは表面被覆によって作用し、添加方法も異なります。
cyclohexylamine、morpholine、DEAEはどのように選び分けますか?
分配比 — 各アミンが凝縮するまでにどこまで到達するか — で選定します。Cyclohexylamine(高分配比)は遠方の低圧末端を保護し、morpholine(低分配比)はボイラー近傍の復水を保護し、DEAEは中間です。長い系統では通常、均一なpHを保つためにブレンドを使用します。現場での復水pHと鉄分の測定で確認してください。
RawSourceは復水系アミンをバルクで供給していますか?
はい。RawSourceはボイラー復水系の腐食防止プログラム向けにシクロヘキシルアミン、モルホリン、DEAEを、SDS・TDS・CoAを添付してバルク — ドラムおよびトート — で調達します。蒸気が食品に接触する場合は、添加剤と添加量をFDA 21 CFR 173.310に照らしてご確認ください。仕様をお送りいただければ、RFQで対応します。
免責事項。 Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
見積り依頼 製品ページ

製品カタログ →