Enfoque de solución
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (2)
Cyclohexylamine
CAS 108-91-8
Aminas y Amidas
High-ratio neutralizing amine
2357 (CYCLOHEXYLAMINE) · Class High distribution ratio carries the amine far down the steam/condensate system, neutralizing carbonic acid and raising pH in remote return lines
Punto de fusión:-18 °C Punto de ebullición:134 °C at 760 mmHg Densidad:0.8647 at 25 °C
Vista rápida
Detalles completos
Morpholine
CAS 110-91-8
Aminas y Amidas
Low-ratio neutralizing amine
2054 (MORPHOLINE) · Class Lower distribution ratio keeps it concentrated near the boiler/early condensate; paired with cyclohexylamine it gives full-length pH protection
Punto de fusión:-5 °C Punto de ebullición:129 °C at 760 mmHg Densidad:1 at 20 °C
Vista rápida
Detalles completos