Enfoque de solución
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (4)
Caustic Soda (Sodium Hydroxide) Beads
CAS 1310-73-2
Ácidos y Sales
Álcali primario para elevar el pH
1824 (SODIUM HYDROXIDE SOLUTION) · Class Sodium hydroxide sets and holds boiler-water alkalinity/pH in the protective range and supplies the OH- needed to form hydroxyapatite with phosphate
Punto de fusión:318 °C Punto de ebullición:> 130 °C at 760 mmHg Densidad:1.5 at 20 °C
Vista rápida
Detalles completos
Monosodium Phosphate
CAS 7558-80-7
Aditivos Especiales
Ajuste de pH
Supplies orthophosphate that reacts with residual Ca2+ under boiler alkalinity to form soft calcium hydroxyapatite sludge instead of hard tube scale
Punto de fusión:Decomposes at 75 Densidad:2360 kg/cu m Solubility: 121 g/L
Vista rápida
Detalles completos
Sodium Tripolyphosphate (STPP)
CAS 7758-29-4
Ácidos y Sales
Quelación / Secuestro
Polyphosphate both sequesters hardness and reverts to orthophosphate at temperature, reinforcing the phosphate residual that precipitates calcium as removable sludge
Punto de fusión:622 °C Densidad:2.52 g/cm3 Solubility: Freely soluble in water. Insoluble in ethanol
Vista rápida
Detalles completos
Polyacrylic Acid Sodium (PAAS)
CAS 9003-04-7
Polímeros y Resinas
Acondicionamiento
Conditions the phosphate/calcium sludge into a fine, fluid suspension so it discharges cleanly with blowdown rather than caking on tubes
Vista rápida
Detalles completos