Abordagem de solução
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (2)
DBNPA (2,2-Dibromo-3-Nitrilopropionamide)
CAS 10222-01-2
Aditivos Especiais
Biocida não oxidante de ação rápida
2923 (2,2-DIBROMO-3-NITRILOPROPIONAMIDE) · Class The standard RO biocide: fast-kill, non-oxidizing and does not attack the polyamide layer; hydrolyzes to low residual, so it can be slug- or continuously dosed
Ponto de fusão:123 to 126 °C Ponto de ebulição:Decomposes at 190 °C Solubility: In water, 1.5 g/100 mL (15,000 mg/L)
Visualização rápida
Detalhes completos
Isothiazolinone(CMIT/MIT)
CAS 26172-55-4
Aditivos Especiais
Conservação
Non-oxidizing isothiazolinone used for membrane biofilm control and preservation/lay-up; membrane-safe alternative dosing chemistry to DBNPA
Ponto de fusão:54-55 °C Densidade:For a mixture of 5-chloro-2-methyl-3(2H)-isothi… Solubility: Solubility in g/100 mL solvent: water, infinite
Visualização rápida
Detalhes completos