Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (6)
Aluminium Sulfate
CAS 10043-01-3
Säuren & Salze
Standard-Flockungsmittel (alum)
3264 (ALUMINUM SULFATE, SOLUTION) · Class Alum hydrolyzes to Al(OH)3, neutralizing the negative charge on colloids and sweep-flocculating turbidity; the classic primary coagulant. (Role is coagulation, not pH adjustment.)
Schmelzpunkt:-16 °C Siedepunkt:101 °C at 760 mmHg Dichte:2.71 at 20 °C 1.7 at 20 °C
Schnellansicht
Alle Details
Ferric Chloride
CAS 7705-08-0
Säuren & Salze
High-performance coagulant
1773 (FERRIC CHLORIDE) · Class Fe(III) hydrolyzes to dense Fe(OH)3 flocs effective over a wide pH and for phosphate/colour removal; stronger sweep coagulation than alum. (Role is coagulation.)
Schmelzpunkt:306 °C Siedepunkt:315 °C at 760 mmHg (Decomposes) Dichte:2.8 at 20 °C (anhydrous solid)
Schnellansicht
Alle Details
Poly Aluminum Chloride (PAC)
CAS 1327-41-9
Spezialadditive
Chelatisierung / Sequestrierung
Pre-hydrolyzed aluminum coagulant that works across a broad pH with less alkalinity consumption and lower sludge than alum. (Role is coagulation.)
Schnellansicht
Alle Details
Polyferric Sulphate (PFS)
CAS 10028-22-5
Säuren & Salze
Iron-based coagulant
Pre-hydrolyzed iron coagulant giving fast, dense flocs and good colour/turbidity removal. (Spine mis-tags this Moisture Control; chemistry is iron coagulation.)
Schmelzpunkt:The Anhydrous form decomposes (480ºC) Siedepunkt:The Anhydrous form decomposes (480ºC) Dichte:3.1 at 20 °C
Schnellansicht
Alle Details
Polyacrylamide Flocculant
CAS 9003-05-8
Polymere & Harze
Anionic PAM flocculant
High-MW polyacrylamide bridges destabilized micro-flocs into large, fast-settling flocs, sharpening clarifier overflow clarity
Schnellansicht
Alle Details
PolyDADMAC
CAS 26062-79-3
Spezialadditive
Kationisches Koagulationspolymer
Cationic organic coagulant that neutralizes colloid charge without adding metal sludge; often used to cut metal-salt dose. (Role is coagulation.)
Schnellansicht
Alle Details
Verwandte Produktfamilien
● Verfügbar
Anorganische Koagulationsmittel
Aluminum sulfate, ferric chloride, polyaluminum chloride, and ferric sulfate for charge neutralization
CoagulationKlärung
6 chemistries
Familie anzeigen
● Sourcing-only
Polymere Flockungsmittel
Anionic, cationic, and nonionic polyacrylamides for sludge dewatering and clarification
FlocculationDewatering
2 chemistries
Familie anzeigen