Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (5)
Hydroxyethylidene Diphosphonic Acid
CAS 2809-21-4
Phosphorsäureester & Derivate
Primärer Ablagerungsinhibitor für CaCO3
HEDP threshold-inhibits CaCO3/CaSO4 and is thermally stable enough for low/medium-pressure boiler service, keeping hardness from nucleating on tubes
Schmelzpunkt:198-199 Siedepunkt:578.8 Solubility: 1.15e+01 g/L
Schnellansicht
Alle Details
Polyacrylic Acid Sodium (PAAS)
CAS 9003-04-7
Polymere & Harze
Konditionierung
Polyacrylate disperses precipitated hardness and iron oxide as a mobile sludge that leaves with blowdown rather than baking onto the tube
Schnellansicht
Alle Details
Sodium Polyaspartate (PASP)
CAS 55719-33-0
Säuren & Salze
pH-Einstellung
Biodegradable polyaspartate inhibits and disperses CaCO3/CaSO4/silica scale; a greener dispersant option. (Spine tags pH Adjustment; chemistry is scale inhibition.)
Schnellansicht
Alle Details
Ethylenediaminetetraacetic Acid
CAS 60-00-4
Amine & Amide
Breitband-Chelatbildner
EDTA forms soluble 1:1 chelates with Ca2+/Mg2+/Fe, dissolving residual hardness so it cannot precipitate on heat-transfer surfaces
Schmelzpunkt:237 °C Dichte:0.86 at 20 °C Solubility: 1000000 mg/L at 25 °C
Schnellansicht
Alle Details
DTPA (Diethylenetriaminepentaacetic Acid)
CAS 67-43-6
Amine & Amide
High-performance chelant for iron
Higher-denticity chelant holds iron and hardness through higher temperatures than EDTA, backstopping the program at elevated boiler pressure
Physical Description: White to off-white solid Siedepunkt:Decomposes Schmelzpunkt:219-220 ºC
Schnellansicht
Alle Details
Verwandte Produktfamilien
● Verfügbar
Phosphonat-Ablagerungsinhibitoren
HEDP, ATMP, DTPMPA und Spezialphosphonate zur Verhinderung von Calciumcarbonat-, Sulfat- und Silikatablagerungen
HärtestabilisierungChelatbildung
13 chemistries
Familie anzeigen
● Verfügbar
Chelatbildner & Sequestriermittel
EDTA, DTPA und Citronensäure zur Härtesequestrierung und Eisenkontrolle
ChelatbildungSequestrierung
7 chemistries
Familie anzeigen