Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
Water & System Assessment
Characterize the water and the system — hardness, alkalinity, pH, TDS/conductivity, microbial load, and the metallurgy and temperatures of the equipment being protected.
2
Program & Chemistry Selection
Match coagulants, flocculants, scale and corrosion inhibitors, biocides, or pH adjusters to the water profile and discharge limits, factoring compatibility with any existing program.
3
Jar Testing & Dosing
Confirm coagulant and flocculant dose and feed point by jar test, set inhibitor and biocide treat rates, and size packaging (drums, totes, bulk) to consumption.
4
Monitoring & Control
Track residuals, turbidity, ORP, corrosion coupons, and effluent compliance, adjusting chemistry and dose as feedwater and load change.
Recommended Chemistries (5)
Sulfuric Acid 93%
CAS 7664-93-9
Säuren & Salze
Primärsäure zur pH-Senkung
1830 (SULFURIC ACID) · Class Lowest-cost strong acid for neutralizing alkaline effluent to the discharge band; high neutralizing capacity per volume
Schmelzpunkt:10 °C Siedepunkt:290 °C at 760 mmHg Dichte:1.841
Schnellansicht
Alle Details
Hydrochloric Acid
CAS 7647-01-0
Säuren & Salze
pH-Einstellung
1789 (HYDROCHLORIC ACID, SOLUTION) · Class Strong acid where sulfate addition must be avoided (e.g., gypsum-scaling or sulfate-limited permits)
Schmelzpunkt:-115 °C (Melting point is -25 °C for a 39.17% w… Siedepunkt:51 °C at 760 mmHg Dichte:1.05 at 15 °C for 10.17% weight/weight solution
Schnellansicht
Alle Details
Caustic Soda (Sodium Hydroxide) Beads
CAS 1310-73-2
Säuren & Salze
Primäralkali zur pH-Erhöhung
1824 (SODIUM HYDROXIDE SOLUTION) · Class Fast, fully soluble alkali to raise acidic effluent into compliance without adding hardness
Schmelzpunkt:318 °C Siedepunkt:> 130 °C at 760 mmHg Dichte:1.5 at 20 °C
Schnellansicht
Alle Details
Sodium Carbonate (Soda Ash)
CAS 497-19-8
Säuren & Salze
Moderates Alkali und Puffer
Soda ash gives buffered, less-aggressive pH lift than caustic, reducing overshoot on swinging streams
Schmelzpunkt:856 °C Siedepunkt:Decomposes on heating by CO2 loss Dichte:2.54 g/cu cm
Schnellansicht
Alle Details
Calcium Hydroxide (Pickling Lime)
CAS 1305-62-0
Spezialadditive
pH-Einstellung
Lime is the low-cost bulk alkali for large acidic flows and simultaneously aids metals/sulfate precipitation
Schmelzpunkt:580 °C (Decomposes) (Loses H2O) Siedepunkt:Decomposes Dichte:2.24 at 20 °C
Schnellansicht
Alle Details