솔루션 접근법
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Selection Workflow
1
Process & Requirement Definition
Map the unit operation and define the functional, purity, and regulatory requirements the chemical input must meet.
2
Chemistry & Grade Selection
Match the solvent, intermediate, acid or base, catalyst, or specialty additive to the process and downstream compatibility.
3
Trial & Specification
Validate performance at bench or pilot scale, and set the grade, treat rate, and packaging to match throughput and handling.
4
Quality & Supply Assurance
Lock the spec with a CoA and secure multi-origin sourcing for supply resilience and consistent lot quality.
Recommended Chemistries (4)
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
실리콘 플루이드 및 오일
소포 / 거품 제어
Low-viscosity PDMS fluid with high flash point and a flat viscosity-temperature curve; a non-flammable dielectric coolant for transformers and convective thermal management - the silicone heat-transfer option in the spine
빠른 보기
전체 세부정보
Ethylene Glycol
CAS 107-21-1
글리콜 및 폴리올
Glycol intermediate for polyester and antifreeze
Water-miscible glycol coolant with depressed freeze point and elevated boiling point - the base of closed-loop heat-transfer fluids
융점:-13 °C 끓는점:198 °C at 760 mmHg 밀도:1.115 at 20 °C
빠른 보기
전체 세부정보
Diphenyl ether
CAS 101-84-8
용제
용해력
3077 · Class Diphenyl-oxide is half of the classic biphenyl/diphenyl-ether eutectic high-temperature vapor-phase heat-transfer medium (Dowtherm-A type)
융점:27 °C 끓는점:258 °C at 760 mmHg 밀도:1.07 at 27 °C
빠른 보기
전체 세부정보
Biphenyl
CAS 92-52-4
특수 첨가제
용해력
3077 (BIPHENYL) · Class Biphenyl is the co-component of the eutectic aromatic heat-transfer fluid used to ~400C in process heaters
융점:69–71 °C 끓는점:254–255 °C at 760 mmHg 밀도:0.992 at 20 °C
빠른 보기
전체 세부정보