Approche de solution
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Selection Workflow
1
Process & Requirement Definition
Map the unit operation and define the functional, purity, and regulatory requirements the chemical input must meet.
2
Chemistry & Grade Selection
Match the solvent, intermediate, acid or base, catalyst, or specialty additive to the process and downstream compatibility.
3
Trial & Specification
Validate performance at bench or pilot scale, and set the grade, treat rate, and packaging to match throughput and handling.
4
Quality & Supply Assurance
Lock the spec with a CoA and secure multi-origin sourcing for supply resilience and consistent lot quality.
Recommended Chemistries (4)
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
Fluides et Huiles de Silicone
Antimousse / Contrôle de la mousse
Low-viscosity PDMS fluid with high flash point and a flat viscosity-temperature curve; a non-flammable dielectric coolant for transformers and convective thermal management - the silicone heat-transfer option in the spine
Aperçu rapide
Détails complets
Ethylene Glycol
CAS 107-21-1
Glycols et Polyols
Glycol intermediate for polyester and antifreeze
Water-miscible glycol coolant with depressed freeze point and elevated boiling point - the base of closed-loop heat-transfer fluids
Point de fusion:-13 °C Point d'ébullition:198 °C at 760 mmHg Densité:1.115 at 20 °C
Aperçu rapide
Détails complets
Diphenyl ether
CAS 101-84-8
Solvants
Pouvoir solvant
3077 · Class Diphenyl-oxide is half of the classic biphenyl/diphenyl-ether eutectic high-temperature vapor-phase heat-transfer medium (Dowtherm-A type)
Point de fusion:27 °C Point d'ébullition:258 °C at 760 mmHg Densité:1.07 at 27 °C
Aperçu rapide
Détails complets
Biphenyl
CAS 92-52-4
Additifs de Spécialité
Pouvoir solvant
3077 (BIPHENYL) · Class Biphenyl is the co-component of the eutectic aromatic heat-transfer fluid used to ~400C in process heaters
Point de fusion:69–71 °C Point d'ébullition:254–255 °C at 760 mmHg Densité:0.992 at 20 °C
Aperçu rapide
Détails complets