Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Selection Workflow
1
Process & Requirement Definition
Map the unit operation and define the functional, purity, and regulatory requirements the chemical input must meet.
2
Chemistry & Grade Selection
Match the solvent, intermediate, acid or base, catalyst, or specialty additive to the process and downstream compatibility.
3
Trial & Specification
Validate performance at bench or pilot scale, and set the grade, treat rate, and packaging to match throughput and handling.
4
Quality & Supply Assurance
Lock the spec with a CoA and secure multi-origin sourcing for supply resilience and consistent lot quality.
Recommended Chemistries (4)
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
Siliconfluide & -öle
Entschäumung / Schaumkontrolle
Low-viscosity PDMS fluid with high flash point and a flat viscosity-temperature curve; a non-flammable dielectric coolant for transformers and convective thermal management - the silicone heat-transfer option in the spine
Schnellansicht
Alle Details
Ethylene Glycol
CAS 107-21-1
Glykole & Polyole
Glycol intermediate for polyester and antifreeze
Water-miscible glycol coolant with depressed freeze point and elevated boiling point - the base of closed-loop heat-transfer fluids
Schmelzpunkt:-13 °C Siedepunkt:198 °C at 760 mmHg Dichte:1.115 at 20 °C
Schnellansicht
Alle Details
Diphenyl ether
CAS 101-84-8
Lösemittel
Lösevermögen
3077 · Class Diphenyl-oxide is half of the classic biphenyl/diphenyl-ether eutectic high-temperature vapor-phase heat-transfer medium (Dowtherm-A type)
Schmelzpunkt:27 °C Siedepunkt:258 °C at 760 mmHg Dichte:1.07 at 27 °C
Schnellansicht
Alle Details
Biphenyl
CAS 92-52-4
Spezialadditive
Lösevermögen
3077 (BIPHENYL) · Class Biphenyl is the co-component of the eutectic aromatic heat-transfer fluid used to ~400C in process heaters
Schmelzpunkt:69–71 °C Siedepunkt:254–255 °C at 760 mmHg Dichte:0.992 at 20 °C
Schnellansicht
Alle Details