Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Selection Workflow
1
Process & Requirement Definition
Map the unit operation and define the functional, purity, and regulatory requirements the chemical input must meet.
2
Chemistry & Grade Selection
Match the solvent, intermediate, acid or base, catalyst, or specialty additive to the process and downstream compatibility.
3
Trial & Specification
Validate performance at bench or pilot scale, and set the grade, treat rate, and packaging to match throughput and handling.
4
Quality & Supply Assurance
Lock the spec with a CoA and secure multi-origin sourcing for supply resilience and consistent lot quality.
Recommended Chemistries (5)
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
Siliconfluide & -öle
Entschäumung / Schaumkontrolle
Self-emulsified PDMS antifoam that disperses into aqueous process streams; hydrophobic silicone particles de-wet foam films to collapse foam in pulp/paper and adhesive systems
Schnellansicht
Alle Details
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
Siliconfluide & -öle
Entschäumung / Schaumkontrolle
Concentrated silicone compound for high-temperature or high-shear industrial foam where stability and low dose rate are needed
Schnellansicht
Alle Details
N-Propanol
CAS 71-23-8
Spezialadditive
Entschäumung / Schaumkontrolle
1274 (N-PROPANOL) · Class Low-surface-tension alcohol for transient foam knockdown where silicone carryover into the product is unacceptable
Schmelzpunkt:-126 °C Siedepunkt:97 °C at 760 mmHg Dichte:0.803 at 20 °C
Schnellansicht
Alle Details
IPA (Isopropyl Alcohol)
CAS 67-63-0
Lösemittel
General-purpose cleaning solvent
1219 (ISOPROPANOL) · Class Structural isomer of the already-listed N-Propanol (both C3H7OH); near-identical low surface tension (~21.7 mN/m) and water-miscibility give the same Marangoni-suppression / foam-lamellae destabilization mechanism and the same silicone-free, no-PDMS-residue transient-knockdown value. A genuine direct analog to the incumbent, not a role-only look-alike.
Schmelzpunkt:-88 °C Siedepunkt:82 °C at 760 mmHg Dichte:0.785 at 20 °C
Schnellansicht
Alle Details
Ethanol
CAS 64-17-5
Water-miscible low-surface-tension (~22 mN/m) short-chain alcohol and a well-established aqueous/protein foam breaker via the same film-destabilization mechanism. Slightly less hydrophobic than the propanols but same class and same silicone-free niche; its higher volatility strengthens the no-residue story for contamination-sensitive process lines. Genuinely serves this exact use-case.
Schnellansicht
Alle Details
Verwandte Produktfamilien
Related Reading
Technical background and a bulk product for these foam-control programs:
- Complete guide to defoamers — how defoamers and antifoams work, the chemistry families, and how to select and dose them.
- Silicone antifoam emulsion (silicone defoamer) — bulk silicone defoamer for aqueous foam control, with specs, packaging, and starting doses.