솔루션 접근법
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Selection Workflow
1
Process & Requirement Definition
Map the unit operation and define the functional, purity, and regulatory requirements the chemical input must meet.
2
Chemistry & Grade Selection
Match the solvent, intermediate, acid or base, catalyst, or specialty additive to the process and downstream compatibility.
3
Trial & Specification
Validate performance at bench or pilot scale, and set the grade, treat rate, and packaging to match throughput and handling.
4
Quality & Supply Assurance
Lock the spec with a CoA and secure multi-origin sourcing for supply resilience and consistent lot quality.
Recommended Chemistries (5)
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
실리콘 플루이드 및 오일
소포 / 거품 제어
Self-emulsified PDMS antifoam that disperses into aqueous process streams; hydrophobic silicone particles de-wet foam films to collapse foam in pulp/paper and adhesive systems
빠른 보기
전체 세부정보
Food-Grade Silicone Antifoam Emulsion (10-50% Active)
CAS 63148-62-9
실리콘 플루이드 및 오일
소포 / 거품 제어
Concentrated silicone compound for high-temperature or high-shear industrial foam where stability and low dose rate are needed
빠른 보기
전체 세부정보
N-Propanol
CAS 71-23-8
특수 첨가제
소포 / 거품 제어
1274 (N-PROPANOL) · Class Low-surface-tension alcohol for transient foam knockdown where silicone carryover into the product is unacceptable
융점:-126 °C 끓는점:97 °C at 760 mmHg 밀도:0.803 at 20 °C
빠른 보기
전체 세부정보
IPA (Isopropyl Alcohol)
CAS 67-63-0
용제
General-purpose cleaning solvent
1219 (ISOPROPANOL) · Class Structural isomer of the already-listed N-Propanol (both C3H7OH); near-identical low surface tension (~21.7 mN/m) and water-miscibility give the same Marangoni-suppression / foam-lamellae destabilization mechanism and the same silicone-free, no-PDMS-residue transient-knockdown value. A genuine direct analog to the incumbent, not a role-only look-alike.
융점:-88 °C 끓는점:82 °C at 760 mmHg 밀도:0.785 at 20 °C
빠른 보기
전체 세부정보
Ethanol
CAS 64-17-5
Water-miscible low-surface-tension (~22 mN/m) short-chain alcohol and a well-established aqueous/protein foam breaker via the same film-destabilization mechanism. Slightly less hydrophobic than the propanols but same class and same silicone-free niche; its higher volatility strengthens the no-residue story for contamination-sensitive process lines. Genuinely serves this exact use-case.
빠른 보기
전체 세부정보
Related Reading
Technical background and a bulk product for these foam-control programs:
- Complete guide to defoamers — how defoamers and antifoams work, the chemistry families, and how to select and dose them.
- Silicone antifoam emulsion (silicone defoamer) — bulk silicone defoamer for aqueous foam control, with specs, packaging, and starting doses.