석유·가스·광업 / 솔루션 계열

스케일 방지제

생산, 주입, 생산수 계통의 탄산염 및 황산염 스케일 제어용 포스포네이트계 임계 억제제와 폴리카복실레이트계 분산제 — HEDP, ATMP, polyacrylic acid.

개요

스케일 방지제는 수 ppm 수준으로 주입되어 탄산염, 황산염 및 관련 무기 스케일이 생산 튜빙, 주입 라인, 지상 설비에 결정화되는 것을 막는 임계(threshold) 약품입니다. 이들은 화학량론적 비율 이하에서 작용합니다: 소량 투입으로 스케일 부하 전체를 킬레이트화하는 것이 아니라 결정 핵생성과 성장을 교란합니다. 포스포네이트와 폴리카복실레이트 두 계열이 대부분의 역할을 담당하며, 많은 현장 프로그램이 두 계열을 혼합합니다. 일반적인 규격이 아니라 실제로 발생하는 스케일 종류에 맞추어 억제제를 선정하십시오.

HEDP and ATMP are the standard phosphonates. Both inhibit calcium carbonate and calcium sulfate at single-digit ppm, which keeps treat cost low. The honest limit is thermal and pH stability: phosphonate performance degrades at high temperature and very low pH, and phosphonate discharge carries eutrophication scrutiny in some jurisdictions. Confirm bottomhole temperature and brine pH before committing to a phosphonate-only program, and confirm regulatory status for your application.

Polyacrylic acid is the polycarboxylate workhorse. Rather than inhibiting nucleation, it disperses precipitated particles and suppresses barium and strontium sulfate, which phosphonates handle poorly. Pairing a phosphonate for carbonate control with a low-molecular-weight polyacrylate for sulfate dispersion covers most produced-water chemistries. Set dose from a static or dynamic scale-loop test on your actual brine, not from a generic ppm figure.

권장 화학제품
원료 15종
Acrylic Acid/AMPS Copolymer (AA/AMPS)
CAS 40623-75-4
스케일 억제 빠른 보기
Amino Trimethylene Phosphonic Acid (ATMP)
CAS 6419-19-8
포스포네이트계 임계 스케일 방지제 빠른 보기
Aminotris(methylenephosphonic acid) Tetrasodium Salt (ATMP, Tetrasodium Salt)
CAS 20592-85-2
스케일 억제 빠른 보기
Bis(hexamethylene Triamine Penta(methylene Phosphonic Acid)) (BHMTPMPA)
CAS 34690-00-1
스케일 억제 빠른 보기
Diethylenetriamine Penta(methylenephosphonic Acid) (DTPMPA)
CAS 15827-60-8
스케일 억제 빠른 보기
Diethylenetriamine Penta(methylenephosphonic Acid) Pentasodium Salt (DTPMP·Na5)
CAS 68155-78-2
스케일 억제 빠른 보기
Ethylenediamine Tetra(methylene Phosphonic Acid) Sodium Salt (EDTMPS)
CAS 1429-50-1
스케일 억제 빠른 보기
Etidronic Acid, Disodium Salt (HEDP·Na2, Disodium Etidronate)
CAS 7417-83-6
스케일 억제 빠른 보기
HEDP (Hydroxyethylidene Diphosphonic Acid, Etidronic Acid)
CAS 2809-21-4
포스포네이트계 임계 스케일 방지제 빠른 보기
Hydrolyzed Polymaleic Anhydride (HPMA)
CAS 26099-09-2
스케일 억제 빠른 보기
Pentasodium Aminotrimethylene Phosphonate (ATMP-Na5)
CAS 2235-43-0
스케일 억제 빠른 보기
Phosphino-Carboxylic Acid Copolymer (PCA)
CAS 71050-62-9
스케일 억제 빠른 보기
Phosphonobutane Tricarboxylic Acid (PBTC)
CAS 37971-36-1
스케일 억제 빠른 보기
Polyepoxysuccinic Acid (PESA)
CAS 51274-37-4
스케일 억제 빠른 보기
Tetrasodium Etidronate (Tetrasodium HEDP)
CAS 3794-83-0
스케일 억제 빠른 보기
사용처
  • 생산 튜빙, 플로우라인, 지상 설비의 탄산염·황산염 스케일 제어
  • 물 주입정 및 처리정의 연속 주입 및 스퀴즈 처리
  • 생산수 및 미드스트림 스케일 방지 프로그램
  • 냉각수 및 공정수의 임계(threshold) 억제
  • 막 및 역삼투용 스케일 방지·분산 (polycarboxylate)
자주 묻는 질문
스케일 방지제란 무엇이고 임계 억제는 어떻게 작용합니까?
스케일 방지제는 무기 스케일(탄산염, 황산염)이 설비에 침착되는 것을 방지합니다. 임계 억제(threshold inhibition)란 화학양론 이하의 용량 — 수 ppm — 으로 결정 핵생성과 성장을 교란해 스케일 부하 전체를 화학적으로 결합하지 않고도 스케일이 생성되지 않게 하는 것을 말합니다. 포스포네이트와 폴리카복실레이트가 두 가지 주요 화학 계열이며, 함께 사용하는 경우가 많습니다.
HEDP와 ATMP 중 어느 포스포네이트를 지정해야 합니까?
두 제품 모두 한 자릿수 ppm 수준에서 calcium carbonate 및 sulfate 스케일을 억제하는 임계(threshold) 억제제입니다. ATMP는 탄산염 억제력과 금속이온 봉쇄력이 강하고, HEDP는 염소 내성이 우수하여 탄산염과 황산염 모두에 널리 사용됩니다. 선정은 염수 조성, 온도, pH에 따라 달라지므로 실제 사용 수질로 스케일 루프 시험을 통해 확인하십시오.
포스포네이트 스케일 방지제는 고온에서도 효과가 있습니까?
포스포네이트는 고온과 매우 낮은 pH에서 성능이 저하되므로, 고온 산성 유정에서는 포스포네이트 단독 프로그램의 효과가 떨어질 수 있습니다. 먼저 공저 온도와 염수 pH를 확인하고, 조건이 가혹한 경우에는 polyacrylic acid 등 폴리카복실레이트계 분산제를 병용하거나 대체한 뒤 동적 스케일 루프 시험으로 검증하십시오.
RawSource는 스케일 방지제를 벌크로 공급합니까?
네. RawSource는 HEDP, ATMP 및 polyacrylic acid를 드럼, 토트 및 벌크 물량으로 소싱하며, 각 제품에 SDS, TDS, COA 문서를 제공합니다. 스케일 종류, 염수 분석, 온도 및 주입 지점을 기재해 벌크 RFQ를 제출해 주십시오. 해당 용도와 관할 지역의 규제 및 방류 관련 상태를 확인하십시오.
면책 조항. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
견적 요청 제품 페이지

전체 제품 카탈로그 →