천연가스 및 파이프라인용 탈수·하이드레이트 제어 글리콜 — TEG, MEG, DEG — 및 열역학적 하이드레이트 억제제인 methanol.
탈수용 글리콜은 천연가스에서 수증기를 제거하여 통상 MMscf당 수분 약 7 lb 수준의 파이프라인 수분 함량 기준을 충족하게 하는 흡습성 디올입니다. Triethylene glycol은 이 용도의 표준 흡수탑 용제입니다. 관련된 두 번째 역할은 하이드레이트 제어입니다: 습성 가스 라인에 주입된 monoethylene glycol은 가스 하이드레이트가 생성되는 온도를 낮춥니다. 용도에 맞게 글리콜을 선정하십시오 — 탈수탑에는 TEG, 하이드레이트 억제에는 MEG입니다.
TEG dominates gas dehydration because it regenerates cleanly at the reboiler temperatures a glycol unit can reach. Diethylene glycol is the older, lower-boiling option and still appears where regeneration temperature is limited, though it carries more vaporization loss. Both run as the working fluid of a closed contactor-and-regenerator loop, so makeup volumes are modest once a unit is charged. Specify TEG for new dehydration service and reserve DEG for existing low-temperature units.
For hydrate inhibition the real choice is MEG versus methanol. MEG can be recovered and recycled through a reclamation unit, which favors continuous, high-volume injection on subsea tiebacks and long flowlines. Methanol is cheaper per gallon and effective for startup or intermittent duty, but it is usually lost to the hydrocarbon and water phases and can create downstream specification problems. Choose MEG when injection is continuous and recovery pays back; choose methanol for short, low-volume duty.
당사는 분석 및 사이트 개선을 위해, 그리고 — 귀하의 동의가 있는 경우 — 마케팅 및 B2B 방문자 식별을 위해 쿠키와 유사 기술을 사용합니다. 허용 범위를 선택하십시오. 자세한 내용은 다음을 참조하십시오: 개인정보 처리방침.