Glykole für Trocknung und Hydratkontrolle — TEG, MEG und DEG — sowie methanol als thermodynamischer Hydratinhibitor für Erdgas- und Pipelineanwendungen.
Trocknungsglykole sind hygroskopische Diole, die Wasserdampf aus Erdgas entfernen, damit es einen Pipeline-Grenzwert für den Wassergehalt einhält, typischerweise etwa 7 lb Wasser pro MMscf. Triethylene glycol ist das Standardlösemittel im Kontaktor für diese Aufgabe. Eine zweite, verwandte Aufgabe ist die Hydratkontrolle: In Nassgasleitungen injiziertes monoethylene glycol senkt die Temperatur, bei der sich Gashydrate bilden. Stimmen Sie das Glykol auf die Aufgabe ab — TEG für Trocknungskolonnen, MEG für die Hydratinhibierung.
TEG dominates gas dehydration because it regenerates cleanly at the reboiler temperatures a glycol unit can reach. Diethylene glycol is the older, lower-boiling option and still appears where regeneration temperature is limited, though it carries more vaporization loss. Both run as the working fluid of a closed contactor-and-regenerator loop, so makeup volumes are modest once a unit is charged. Specify TEG for new dehydration service and reserve DEG for existing low-temperature units.
For hydrate inhibition the real choice is MEG versus methanol. MEG can be recovered and recycled through a reclamation unit, which favors continuous, high-volume injection on subsea tiebacks and long flowlines. Methanol is cheaper per gallon and effective for startup or intermittent duty, but it is usually lost to the hydrocarbon and water phases and can create downstream specification problems. Choose MEG when injection is continuous and recovery pays back; choose methanol for short, low-volume duty.
Wir verwenden Cookies und ähnliche Technologien für Analysen und zur Verbesserung unserer Website und — mit Ihrer Zustimmung — für Marketing und die Identifikation von B2B-Besuchern. Wählen Sie, was Sie zulassen. Siehe unsere Datenschutzerklärung.