Glicoles de deshidratación y control de hidratos — TEG, MEG y DEG — más metanol como inhibidor termodinámico de hidratos para servicio en gas natural y ductos.
Los glicoles de deshidratación son dioles higroscópicos que remueven el vapor de agua del gas natural para que cumpla un límite de contenido de agua de ducto, típicamente alrededor de 7 lb de agua por MMscf. El trietilenglicol es el solvente estándar de contactora para este servicio. Una segunda función relacionada es el control de hidratos: el monoetilenglicol inyectado en líneas de gas húmedo baja la temperatura a la que se forman los hidratos de gas. Ajuste el glicol a la función — TEG para torres de deshidratación, MEG para inhibición de hidratos.
TEG dominates gas dehydration because it regenerates cleanly at the reboiler temperatures a glycol unit can reach. Diethylene glycol is the older, lower-boiling option and still appears where regeneration temperature is limited, though it carries more vaporization loss. Both run as the working fluid of a closed contactor-and-regenerator loop, so makeup volumes are modest once a unit is charged. Specify TEG for new dehydration service and reserve DEG for existing low-temperature units.
For hydrate inhibition the real choice is MEG versus methanol. MEG can be recovered and recycled through a reclamation unit, which favors continuous, high-volume injection on subsea tiebacks and long flowlines. Methanol is cheaper per gallon and effective for startup or intermittent duty, but it is usually lost to the hydrocarbon and water phases and can create downstream specification problems. Choose MEG when injection is continuous and recovery pays back; choose methanol for short, low-volume duty.
Usamos cookies y tecnologías similares para análisis y para mejorar nuestro Sitio y — con su consentimiento — para marketing e identificación de visitantes B2B. Elija qué permitir. Consulte nuestra Política de Privacidad.