アミン装置、セパレーター、プロセス容器向けのPDMS系消泡コンパウンドおよびエマルション:疎水性シリカとシリコーンポリエーテル系の展開助剤を組み合わせたポリジメチルシロキサン有効成分により、少量添加で泡を制御します。
シリコーン系抑泡剤(シリコーン系消泡剤)は、polydimethylsiloxane をベースとした配合品で、低表面張力の膜が広がって気泡を保持している薄い液膜を破壊することにより、泡を破壊し発生を防ぎます。 ppmレベルで作用するため、ガス処理、分離、用水処理の各設備で泡が処理量を脅かす場面でも効率的です。有効成分はシリコーンで、配合の残りの部分は特定の媒体中での分散性と持続性を制御します。添加量を決める前に、系に合った形態を選定してください。
The defoaming power comes from PDMS combined with hydrophobic, surface-treated amorphous silica. The silica particles concentrate at the foam film and help it collapse while the silicone fluid spreads. The genuine trade-off is carryover: silicone is hard to remove downstream and can deposit on membranes, catalysts, or coating surfaces, so where silicone contamination is a problem operators choose a polyether (non-silicone) defoamer instead. Decide by what the stream feeds next.
Form follows the medium. Polyether-modified siloxanes improve compatibility and spreading and stabilize emulsion grades for aqueous systems such as amine units and produced water; neat fluids and compounds suit hydrocarbon streams. Dose to effect and no higher, because overdosing silicone antifoam can itself stabilize a fine secondary foam and raises carryover risk. Start low and titrate against the actual foam height in the vessel.
当社は、分析および本サイトの改善のため、また — お客様の同意がある場合は — マーケティングおよびB2B訪問者識別のために、クッキーおよび類似技術を使用します。許可する範囲をお選びください。詳細は プライバシーポリシー.