石油・ガス・鉱業/ソリューションファミリー

解乳化剤 / 脱油剤

原油/水分離用の薬剤 — EO/POブロック共重合体系の乳化破壊基剤およびグリコールエーテル系キャリア溶剤 — 生産流体、脱塩装置、タンク底部のエマルションを分離。

概要

解乳化剤は、油中水型エマルションを不安定化させ、セパレーター、トリーター、脱塩装置で原油と水がきれいに分離するようにする界面活性の薬剤です。 生産現場の大半で用いられる主要な有効成分クラスはEO/POブロック共重合体で、多くはグリコールまたは樹脂骨格に構築され、キャリア溶剤に溶解して供給されます。これらは単一分子の製品ではなく配合品です:最終的な解乳化剤は、特定の原油とエマルションに合わせて調整されたブレンドです。

Because emulsion stability depends on the crude, the water cut, and the solids present, demulsifier selection is field-specific and screened by bottle test before a field trial. The trade-off shows up in what you optimize. A chemistry tuned for a fast, large water drop can leave a fuzzy oil-water interface and oily water, while one tuned for a clean interface may drop water more slowly. Match the selection to whichever the downstream spec penalizes.

The carrier solvent u2014 commonly a glycol ether such as 2-butoxyethanol u2014 couples the active package, sets pour point, and controls injection viscosity in cold service. RawSource supplies the base chemistries and carrier solvents that go into these programs rather than named finished blends. Confirm regulatory status for your application and jurisdiction, and validate any demulsifier by bottle test on your own emulsion before committing volume.

主な用途
  • 生産セパレーターおよびトリーターでの一次的な原油/水分離
  • 製油所の脱塩装置におけるエマルションの破壊
  • タンクボトムおよびスロップオイルのエマルション分離
  • 産出水の脱油(水中油型用の逆エマルション破壊剤)
  • 重質油・SAGDのエマルション処理
よくあるご質問
RawSourceは石油・ガス向けにどのような解乳化剤の化学品を供給していますか?
RawSourceは、油田用破乳剤プログラムの基礎となる薬剤を調達します:生産用途の主要な有効成分クラスであるEO/POブロック共重合体、および2-ブトキシエタノールなどのグリコールエーテル系キャリア溶剤です。仕上げられた破乳剤は各社独自のブレンドであり、RawSourceは製品名の付いた配合品ではなく、それらに用いられるバルクのベース有効成分と溶剤を供給します。
RawSourceは油田用解乳化剤をバルクで供給していますか?
はい。RawSourceは解乳化剤のベース原料およびキャリヤー溶剤を、SDS・TDS・CoAを添付してドラム、トート、IBC、バルクの各規模で供給します。CASまたは対象用途(生産、脱塩装置、タンクボトム、産出水の脱油)と数量を添えてバルクRFQをご送信ください。
解乳化剤をボトルテストで選定するのはなぜですか?
エマルションの安定性は油田ごとの原油性状、含水率、温度、固形分に左右されるため、あらゆる現場で通用する単一の解乳化剤は存在しません。ボトルテストでは実際のエマルションで候補薬剤をスクリーニングし、現場試験や数量のコミットの前に、水の分離速度、界面の状態、分離水の清澄度を比較します。
解乳化剤中のキャリヤー溶剤はどのような働きをしますか?
キャリヤー溶剤(一般に2-butoxyethanolなどのグリコールエーテル)は有効成分パッケージを溶解・可溶化し、寒冷地保管に向けて製品の流動点を下げ、注入粘度を制御して、注入点で解乳化剤が適切に送液・分散されるようにします。
免責事項。 Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
見積り依頼 製品ページ

製品カタログ →