Epoxid-Aminhärter — die schnellen Aliphaten DETA und TETA plus die cycloaliphatischen IPDA und PACM — für die Härtung von Klebstoffen, Beschichtungen und Verbundwerkstoffen bei Umgebungs- und erhöhter Temperatur.
Aminhärter sind die Härter, die mit Epoxidharzen reagieren und ein vernetztes Duroplastnetzwerk aufbauen. Für Kunststoffe und Composites gliedern sie sich in zwei Arbeitsklassen: aliphatische Amine (Diethylentriamin und Triethylentetramin), die bei Raumtemperatur schnell aushärten, und cycloaliphatische Amine (Isophorondiamin und PACM), die langsamer aushärten, dafür aber bessere Farbe und eine höhere Glasübergangstemperatur ergeben. Wählen Sie den Härter zuerst nach Ihrem Härtungsregime und dann nach den Gebrauchseigenschaften, die das Bauteil braucht.
The trade-off is real and worth stating plainly. Aliphatic amines like DETA and TETA cure at ambient temperature, accept high filler loads, and cost less, but they have short pot life and can blush or yellow in humid conditions. Cycloaliphatic amines such as IPDA hold a longer pot life and resist color change, at a slower cure and a higher price. Use aliphatics for fast field work; specify cycloaliphatics where appearance and weathering matter.
PACM is the clarity curative in this group. It produces water-white castings and a high Tg, which suits clear encapsulants and premium composite tooling, and it usually needs a post-cure to reach full properties. For most ambient adhesive and laminating work, a DETA or TETA blend is enough. Reserve IPDA and PACM for parts where optical clarity, UV stability, or elevated service temperature justify the longer cure and added cost.
Wir verwenden Cookies und ähnliche Technologien für Analysen und zur Verbesserung unserer Website sowie — mit Ihrer Einwilligung — für Marketing und die Identifizierung von B2B-Besuchern. Wählen Sie aus, was Sie zulassen möchten. Siehe unsere Datenschutzerklärung.