섬유 / 솔루션 패밀리

섬유용 효소

Amylase, cellulase, and catalase enzymes for desizing, biopolishing and denim bio-stoning, and residual-peroxide removal in textile wet processing.

개요

섬유용 효소는 특정 습식 가공 작업 — 전분 풀 분해, 셀룰로스 섬유 평활화, 잔류 표백제 분해 — 을 공장 가동 온도와 중성에 가까운 pH에서 수행하는 생물학적 촉매입니다. 섬유 공장에서는 세 가지가 대부분의 역할을 담당합니다: amylase, cellulase, catalase입니다. 각 효소는 하나의 기질에만 작용하고 직물의 나머지 부분은 손상시키지 않으며, 그래서 더 가혹한 화학적·기계적 방법을 대체했습니다.

Amylase hydrolyzes starch size so it rinses off cleanly before dyeing, and catalase decomposes the hydrogen peroxide left after bleaching so it cannot interfere with reactive dyes. Both run in narrow windows; an amylase optimized near 60-70°C and pH 6 loses activity outside that band. Specify the enzyme grade to your bath temperature and pH rather than dosing more product to compensate for a poor match.

Cellulase drives biopolishing and denim bio-stoning. It shaves the protruding fibrils that cause pilling, smooths the surface, and replaces pumice stones in garment laundries. Here is the real trade-off: the same activity that smooths the surface also removes fabric, so an over-dose costs you tensile strength and weight along with the fuzz. Control dose, time, and temperature, and deactivate the enzyme on schedule.

사용처
  • 염색 전 전분 호부 처리된 면 및 혼방의 효소 호발
  • 셀룰로스 섬유의 필링 감소 및 표면 평활성 개선을 위한 바이오폴리싱
  • 의류 워싱 공장의 데님 바이오스토닝 및 마모 가공
  • Catalase peroxide kill before reactive dyeing to prevent shade variation
  • 강알칼리 공정을 대체하는 저온 표면 처리
자주 묻는 질문
RawSource는 섬유용 효소를 벌크로 공급합니까?
네. RawSource는 섬유 습식 가공용 amylase, cellulase 및 catalase 효소를 벌크로 소싱하며 검증된 CAS 번호와 SDS/TDS 문서를 제공합니다. 공정 단계, 욕 온도 및 목표 pH를 보내주시면 구매팀이 이에 맞는 그레이드로 견적을 제공합니다.
호발 효소와 바이오폴리싱 효소의 차이는 무엇입니까?
호발은 amylase로 전분 호제를 가수분해하여 염색 전에 씻겨 나가도록 하는 공정입니다. 바이오폴리싱은 cellulase로 셀룰로스 원단에 돌출된 피브릴을 깎아내어 필링을 줄이고 표면을 매끄럽게 합니다. 두 공정은 서로 다른 기질(전분 대 셀룰로스)에 작용하며 공정상 서로 다른 단계에서 투입됩니다.
표백 후에 catalase를 사용하는 이유는 무엇입니까?
Hydrogen peroxide left in the fabric after bleaching interferes with reactive dyes and causes shade variation. Catalase decomposes that residual peroxide into water and oxygen at process temperature, so the bath can move to dyeing without an extra rinse or a reducing-agent step.
cellulase를 과다 처리하면 원단이 손상될 수 있습니까?
네. 표면을 매끄럽게 하는 것과 동일한 작용이 셀룰로스도 제거하므로, 과도한 투입량이나 처리 시간은 원단의 인장 강도와 중량을 떨어뜨립니다. 소재를 보호하기 위해 효소 투입량, 온도 및 반응 시간을 관리하고 예정된 시점에 효소를 실활시키십시오.
면책 조항. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
견적 요청 제품 페이지

전체 제품 카탈로그 →