도료·건설 / 솔루션 계열

pH 중화제 및 완충제

아민 pH 중화제 — AMP-95 및 triethanolamine — 는 수성 도료를 목표 pH로 유지하여 안정적인 점도, 캔 내 안정성, 일정한 희석 작업성을 제공합니다.

개요

pH 중화제는 바인더, 증점제 및 분산제가 제 성능을 내는 약알칼리 영역으로 수성 코팅의 pH를 올리고 유지하기 위해 첨가하는 아민입니다. 대부분의 라텍스 및 아크릴 에멀션은 바인더에 따라 pH 8~9 부근에 오도록 배합됩니다. 이 영역에서는 수지의 산성기와 회합형 증점제가 이온화 상태를 유지하므로 점도와 캔 내 안정성을 예측 가능하게 유지할 수 있습니다. 중화제는 렛다운 단계에서 투입하고, 고정된 단일 수치가 아니라 바인더 공급업체의 목표값에 대조해 pH를 확인하십시오.

AMP-95 is the workhorse neutralizer for latex and acrylic paints. It is a lower-odor amino alcohol that lifts pH with a small dose and also helps wet pigment, so formulators reach for it where odor and finish matter. The trade-off is real. Every amine neutralizer adds to the formula's amine load, which can affect can odor and may count toward volatile organic compound (VOC) content depending on how a jurisdiction classifies it. Confirm the VOC treatment for your market.

Triethanolamine (TEA) is the second common choice and doubles as a co-dispersant, which is useful when a formula needs pH control and pigment wetting from one additive. Pick the neutralizer to match the system: AMP-95 where low odor and minimal water sensitivity matter, triethanolamine where its dispersing action earns its place. Both are amines, so the same odor and VOC questions apply, and triethanolamine's regulatory profile should be confirmed for your application and jurisdiction before specifying.

사용처
  • 캔 내 pH 안정성이 요구되는 수성 건축용 라텍스 및 아크릴 도료
  • pH가 분산제 성능을 좌우하는 안료 분산체 및 착색제
  • 저장 기간 동안 일정한 점도가 필요한 수성 산업용 및 목재용 도료
  • 아크릴 또는 비닐 에멀젼 기반 접착제, 실란트, 프라이머
  • 바인더 목표값에 맞춰 pH를 보정해야 하는 희석 및 조색 공정
자주 묻는 질문
RawSource는 수성 코팅용으로 어떤 pH 중화제를 공급합니까?
도료 분야에서 RawSource는 수성 도료를 약알칼리 작업 영역에 유지하는 아민 중화제인 AMP-95(2-amino-2-methyl-1-propanol)와 triethanolamine(TEA)을 소싱합니다. 두 제품 모두 CAS 및 문서와 함께 벌크로 RFQ 가능합니다.
수성 코팅에 pH 중화제가 필요한 이유는 무엇입니까?
에멀션 바인더, 회합형 증점제, 분산제는 약알칼리 영역에서 성능을 발휘하며, 바인더에 따라 통상 pH 8~9 부근입니다. 중화제는 pH를 그 범위로 올려 유지하므로 저장 및 희석 과정에서 점도와 캔 내 안정성이 예측 가능하게 유지됩니다.
AMP-95와 triethanolamine의 차이는 무엇입니까?
AMP-95는 냄새가 적은 아미노 알코올로, 소량으로 pH를 조정하고 안료 습윤을 돕습니다. Triethanolamine은 보조 분산제 역할도 하므로 하나의 첨가제로 pH와 안료 습윤을 함께 처리할 수 있습니다. 냄새, 투입량, 내수성, 그리고 분산 작용이 필요한지 여부를 기준으로 선택하십시오.
아민 중화제가 냄새나 VOC에 영향을 줍니까?
모든 아민은 제형의 아민 부하를 높여 캔 내 냄새에 영향을 줄 수 있고, 관할 지역이 해당 첨가제를 어떻게 분류하는지에 따라 휘발성 유기화합물(VOC) 함량에 산입될 수 있습니다. 사양을 확정하기 전에 해당 시장의 VOC 취급 기준과 규제 상태를 확인하십시오.
면책 조항. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
견적 요청 제품 페이지

전체 제품 카탈로그 →