도료·건설 / 솔루션 계열

글리콜에테르 및 함산소 용제

수성 및 용제형 도료의 도막 형성을 가능하게 하는 조막 조제 및 공용매 — butyl glycol ether, diethylene glycol monoethyl ether, 동결-융해 안정용 글리콜, 저VOC 옵션 포함.

개요

글리콜에테르 용제는 수성 도료가 건조되면서 연속 도막을 형성하게 하는 융착제 및 보조 용제입니다. A coalescent temporarily softens latex particles so they fuse below the binder's minimum film-formation temperature (MFFT), then diffuses out of the film. Ethylene glycol monobutyl ether (butyl glycol ether, CAS 111-76-2) is the standard coalescent for latex systems. Specify a coalescent when a paint must cure at low ambient temperature, and size the dose to the binder's MFFT rather than overdosing for insurance.

Here is the honest trade-off. A coalescent lowers MFFT and improves cold-weather film formation, but a slow-evaporating coalescent stays in the film and counts toward the coating's VOC. Where regulations cap VOC, formulators move to low-VOC or VOC-exempt co-solvents and lean harder on binder design instead of dosing more solvent. Diethylene glycol monoethyl ether (CAS 111-90-0) is a high-boiling co-solvent used to extend open time and flow. Confirm the VOC classification for your product type and jurisdiction before locking a grade.

Ethylene glycol (CAS 107-21-1) and propylene glycol (CAS 57-55-6) sit in the same toolbox as freeze-thaw stabilizers and co-solvents; propylene glycol is the lower-toxicity choice where a paint may see consumer handling. Diacetone alcohol (CAS 123-42-2) is a ketone-alcohol co-solvent for solvency and flow. None of these replaces the binder, so treat them as formulation aids that tune drying and stability, not as the property-defining ingredient.

사용처
  • 수성(라텍스) 건축용 및 산업용 도료용 조막 조제
  • 용제형 도료, 락커, 인쇄 잉크용 공용매
  • 저온 보관·운송되는 수성 도료용 동결-융해 안정제
  • 수성 목재 및 금속 도료용 커플링 및 오픈타임 조제
  • 규제 대상 건축용 도료를 위한 저VOC 보조 용제 패키지
자주 묻는 질문
RawSource는 도료용으로 어떤 글리콜에테르 용제를 공급합니까?
RawSource는 라텍스용 표준 융착 조제인 ethylene glycol monobutyl ether, 고비점 보조 용제인 diethylene glycol monoethyl ether, 그리고 동결-융해 안정제 및 보조 용제로 사용되는 ethylene glycol과 propylene glycol을 공급합니다. 케톤-알코올계 보조 용제인 diacetone alcohol도 공급 가능합니다. 각 품목은 요청 시 CAS와 용도를 명시해 벌크로 견적됩니다.
수성 도료에서 융착제는 어떤 역할을 합니까?
융착제는 휘발이 느린 용제로, 라텍스 입자를 일시적으로 연화시켜 바인더의 최저 필름 형성 온도(MFFT) 이하에서도 연속적인 도막으로 융합되게 합니다. 이후 도막이 경화되면서 확산되어 빠져나갑니다. 융착제가 부족하면 저온에서 도장한 라텍스 도료가 균열되거나 제대로 도막을 형성하지 못할 수 있습니다.
글리콜에테르 융착제는 도료의 VOC에 포함됩니까?
건조 도막에 남는 저휘발성 융착제는 일반적으로 도료의 VOC에 포함됩니다. 규제가 VOC를 제한하는 경우 배합 담당자는 저VOC 또는 VOC 면제 보조 용제를 선택하고 바인더 설계에 더 의존합니다. 그레이드를 지정하기 전에 해당 제품 유형과 관할 지역의 VOC 분류 및 한도를 확인하십시오.
도료에서 ethylene glycol과 propylene glycol의 차이는 무엇입니까?
두 제품 모두 동결-융해 안정제이자 공용매로 작용합니다. propylene glycol은 일반 소비자가 취급할 가능성이 있는 도료처럼 낮은 독성이 선호되는 경우에 주로 선택되고, ethylene glycol은 산업용 시스템에 사용됩니다. 두 제품은 안정성과 건조를 조정하는 배합 보조제이며, 물성을 결정하는 바인더는 아닙니다.
면책 조항. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
견적 요청 제품 페이지

전체 제품 카탈로그 →