プラスチック・ポリマー/ソリューションファミリー

酸化防止剤

加工中および使用中の熱劣化・酸化劣化からポリオレフィン、スチレン系樹脂、各種樹脂を保護するフェノール系酸化防止剤:BHTとTBHQ。

概要

ポリマー用酸化防止剤は、加工中および使用中にプラスチックを劣化させる酸化反応を止める添加剤です。 コンパウンド工程の熱とせん断、および成形品の長期熱老化から保護します。BHTなどのヒンダードフェノール系が、ポリオレフィンおよびスチレン系樹脂向けの主要区分です。酸化防止剤はマスターバッチまたはコンパウンド段階で添加し、ポリマーが最初の熱履歴を受ける前に溶融物全体に分散させてください。

BHT is the low-cost workhorse phenolic antioxidant: effective, widely available, and easy to disperse. The trade-off is volatility. BHT can evaporate during high-temperature processing and migrate or bloom out of thin sections over time, so the protection may not last the full service life of a thick or hot-running part. For durable goods, formulators often pair a primary phenol with a secondary phosphite; for short-life or cost-driven items, BHT on its own is adequate.

tert-Butylhydroquinone (TBHQ) is a second hindered-phenol option, also used as a polymerization inhibitor in monomers and unsaturated polyester resins. Choose the antioxidant by part thickness, processing temperature, and required service life rather than by unit cost alone. Dose to the resin supplier's recommended range: over-addition wastes additive and can cause plate-out, while under-addition shows up as yellowing, embrittlement, or melt-flow drift during processing.

主な用途
  • コンパウンドおよび押出工程におけるポリオレフィンのプロセス安定化
  • 成形品・押出品の長期耐熱老化性
  • マスターバッチ製造における色調とメルトフローの保持
  • モノマーおよび不飽和ポリエステル樹脂の重合禁止
  • スチレン系樹脂およびエンジニアリング熱可塑性樹脂の酸化防止
よくあるご質問
RawSourceはプラスチック向けにどのような酸化防止剤を供給していますか?
RawSourceは、ヒンダードフェノール系酸化防止剤である butylated hydroxytoluene (BHT) と tert-butylhydroquinone (TBHQ) を調達します。BHTはポリオレフィンおよびスチレン系樹脂向けの低コストな一次酸化防止剤であり、TBHQはモノマーや不飽和樹脂中で重合禁止剤としても作用する第二のフェノール系選択肢です。
フェノール系酸化防止剤はポリマー中でどのような働きをしますか?
フェノール系酸化防止剤は、熱とせん断でポリマー鎖を切断する酸化連鎖反応を停止させます。コンパウンド、押出、成形の各工程で溶融樹脂を保護し、成形品の長期熱老化を遅らせて、色調、メルトフロー、機械特性を維持します。
一次酸化防止剤を単独で使うべきですか、それとも二次安定剤と併用すべきですか?
短寿命の部品やコスト重視の部品では、通常はBHTのような一次フェノール系酸化防止剤で十分です。肉厚部品や高温使用では、フェノールがラジカルを捕捉し、ホスファイトが過酸化物を分解するため、一次フェノール系と二次ホスファイト系を併用することが多くあります。部品の肉厚、加工温度、要求される使用寿命に応じて選定してください。
RawSourceはBHTとTBHQをバルクで供給していますか?
はい。RawSourceはBHTとTBHQを、文書一式(CoA、TDS、SDS)を添付して袋、ドラム、バルク数量で調達します。ポリマー、加工温度、目標添加量をバルクRFQでお知らせいただければ、グレード選定と価格をご提示します。
免責事項。 Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
見積り依頼 製品ページ

製品カタログ →